Shonky's Series II Restoration - Parts Shopping List

Quote:

---

Originally Posted by rover4life

yeah gday shonky..i live taree but the landys in question are in narrabri nsw at my mums place yeah if i can get a rr rolling chassis the whole landy be up for parting out or sell complete and prob the 109 chassis rolling
Shaun

---

Thanks Shaun!

I will keep you in mind, but will look around closer to home first. ;)

Thanks mate. :D

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality. There you are Diana - I listened!

- Bellhousing to suit 2.25P (or 2P-IOE).

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.

- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.

- Guide plate for yellow 4WD knob. You know the one I mean...?

- Grille panel. Mine is rusty, but repairable. I am capable, but lazy. Geddit? :p

- Door tops. I need some, but doesn't everybody?

- FIREWALL. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!

- Compressor. Needs to be of reasonable capacity for painting and running air-tools.

- Air tools / spray gear. To use in conjunction with above. ;)

Updated! - Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)

Updated! - Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment, but last week it was bar treads and god only knows what next week will bring...

Updated! - Overdrive. Alternatively, high ratio gears.

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality. There you are Diana - I listened!

- Bellhousing to suit 2.25P (or 2P-IOE).

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.

- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.

- Guide plate for yellow 4WD knob. You know the one I mean...?

- Grille panel. Mine is rusty, but repairable. I am capable, but lazy. Geddit? :p

- Door tops. I need some, but doesn't everybody?

- FIREWALL. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!

- Compressor. Needs to be of reasonable capacity for painting and running air-tools.

- Air tools / spray gear. To use in conjunction with above. ;)

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)
- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment, but last week it was bar treads and god only knows what next week will bring...

- Overdrive. Alternatively, high ratio gears.

Updated! - Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.

- Bellhousing to suit 2.25P (or 2P-IOE).

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
PURCHASED: $150 from ebay - August '08.

- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.

- Guide plate for yellow 4WD knob. You know the one I mean...?

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
PURCHASED: $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.

- Overdrive. Alternatively, high ratio gears.

Updated! - Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.[/QUOTE]

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.


Dinty also kindly donated the following items 'just in case'. Very generous!

- Hand Throttle
- Seat Box (a good 'un)
- Middle seat tool tray
- Fuel fillers x2
- Filler cappings x2 (L and R)

He also offered me a plethora of other stuff, which I already had. Thanks Dennis!

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.

Updated! - Jack, Crank Handle and Wheel Brace

Updated! - Winscreen Wiper Motor and Assembly

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?
Purchased - $100 from Paul Anley - November '08.

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.

- Jack, Crank Handle and Wheel Brace

- Winscreen Wiper Motor and Assembly

Updated! - Fuel tank for LHS Since I have a military tub with provision for twin tanks, I may as well do it!

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.
Ruled out using 2L engine for usability reasons - December 08

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.
Not required as will be refitting current bullbar instead. - Jan 09

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?
Purchased - $100 from Paul Anley - November '08.

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)
Will use the aftermarket ones currently on Ambrose, and find the correct type for that vehicle.

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.
Will use the 235/85R16 Hankook Dynamic Radials currently on Ambrose and find bar treads for that vehicle.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.

- Jack, Crank Handle and Wheel Brace

- Winscreen Wiper Motor and Assembly

- Fuel tank for LHS Since I have a military tub with provision for twin tanks, I may as well do it!

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)
Swapped for a donation through dullbird - May '09.

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.
Ruled out using 2L engine for usability reasons - December 08

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.
Not required as will be refitting current bullbar instead. - Jan 09

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)

- Door tops. I need some, but doesn't everybody?
Purchased - $100 from Paul Anley - November '08.

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)
Will use the aftermarket ones currently on Ambrose, and find the correct type for that vehicle.

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.
Will use the 235/85R16 Hankook Dynamic Radials currently on Ambrose and find bar treads for that vehicle.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.

- Jack, Crank Handle and Wheel Brace

- Winscreen Wiper Motor and Assembly

- Fuel tank for LHS Since I have a military tub with provision for twin tanks, I may as well do it!

- 2.25L Petrol Engine. Preferably complete and in reasonable order. I want to have a crack at reconditioning the engine so it needs to be salvageable (obviously!)
Swapped for a donation through dullbird - May '09.

- Alternatively... 2L IOE Engine. Same as above, but would rather sacrifice originality for practicality.
Ruled out using 2L engine for usability reasons - December 08

- Bellhousing to suit 2.25P (or 2P-IOE).
Kindly donated by Dinty - September '08.

- Front Bumper.
Not required as will be refitting current bullbar instead. - Jan 09

- Rear crossmember. If someone has a good one lying around - great! If not I will have to get one from FWDs.
Purchased - $150 from ebay - August '08.


- Tub to suit 88" or tub side panels. Full tub is preferable as one of the rear panels has a gouge in it. Also easier to fit.
Purchased - $80 from Dinty - September '08.

- Guide plate for yellow 4WD knob. You know the one I mean...?
Kindly donated by Dinty - September '08. Thankyou also to JDNSW for also offering to donate one!

- Grille panel. Mine is repairable, but let me know if you have one lying around just in case. ;)
Purchased - $75 from Hilton Pollard - August '09.

- Door tops. I need some, but doesn't everybody?
Purchased - $100 from Paul Anley - November '08.

- Firewall. To suit 4cyl - needs to be fairly straight and rustfree. I am dubious of my ability to fix the one I have... I will probably give it a go though, but it would be good to know where I can get a good one when I screw it up!
Purchased - $180 from ebay - August '08

- Indicators, tail and running lights. I will probably buy newbies but if someone has some sitting in the shed that they never got around to fitting I would rather I save money and you earn some. ;)
Will use the aftermarket ones currently on Ambrose, and find the correct type for that vehicle.

- Tyres. I am thinking 205R16 Dunlop Super Grippers at the moment.
Will use the 235/85R16 Hankook Dynamic Radials currently on Ambrose and find bar treads for that vehicle.

- Overdrive. Alternatively, high ratio gears.

- Accesories for 2.25 engine. Ie: Starter Dizzy, Carby, Air cleaner, etc. I am looking at purchasing an engine but it is denuded of it's bits.
No longer required as complete engine obtained.

- Jack, Crank Handle and Wheel Brace
Pfft - I'll just go to Super Cheap...

- Winscreen Wiper Motor and Assembly

- Fuel tank for LHS Since I have a military tub with provision for twin tanks, I may as well do it!