-
Well took the front springs off AGAIN this morning to bend the brackets got that all done & they are back on & everything looks good . Also cut the corner off the passengers side bracket aswell so the steering rod clears it all together now..
Just have to fix the turn stop on the passengers side as i was going to do that but it rained so had to bolt up the suspension quick & pack up..
Also have to cut the Ubolts as they are way to long & it will all be done & back on the road ..YAY
When its all done i want to drive it up one of the ramps on full lock right to make sure it doesn't hit when the passenger wheel is right up..Will also drive the drivers side up aswell so i can make sure nothing hits that way aswell..
Will get some pics when i am doing this as i just want to be sure it wont hit at all up or down . . .
-
WELL ITS ALL DONE
-
I also fixed the turn stop on the passengers side .I drilled it to use an extractor but i drilled it crooked so i drilled it right out & put a bolt with a nut on the back.. They are both set at 12mm ... . I wasn't going to stuff around for half a mill....
DID I MENTION THAT ITS DONE & FINISHED .......
-
this week is end better for you than a few past ones, hope things keep going this way for you and Karen. Be good to be able to sneak a bit of a drive out in the bush even if its only to smell the fresh air
cheers
blaze
-
-
:arms::arms::arms::arms:
well done banjo:D
Mrs hh:angel:
-
Great to hear well done looks good too:cool:
Adam
-
Good thing you kept your senses and didn't sell it. ;)
Glad to see it's all sorted.
