Thanks NiteMare, no vacuum tank for me then. Makes connecting it all up a bit easier too.
cheers
Printable View
Thanks NiteMare, no vacuum tank for me then. Makes connecting it all up a bit easier too.
cheers
Front wing is back on. As expected, I had to cut out quite a bit for the type 80 brake booster. I think about a 5mm gap will be visible when the bonnet goes back on but haven't tried it out yet.
https://www.aulro.com/afvb/images/im...13/11/1234.jpg
https://www.aulro.com/afvb/images/im...13/11/1235.jpg
cheers
I've started putting things back together and the plan is to soundproof the cabin as much as possible with mass loaded vinyl. I've bought a roll of it plus some sheets backed with closed cell foam and self adhesive. It seemed to go really well on the doors, next step is the floor, transmission tunnel and seat box.
cheers
Phin
https://www.aulro.com/afvb/images/im...013/11/128.jpg
https://www.aulro.com/afvb/images/im...013/11/129.jpg
https://www.aulro.com/afvb/images/im...013/11/130.jpg
There's been a bit of progress since November. All the brakes are in and I had a first go at bleeding them but haven't adjusted them yet. They need pumping up which I read means that they need adjustment. With the bonnet on you can still see a bit of the new booster, but I'm hoping that the improved braking feel will make up for it.
https://www.aulro.com/afvb/images/im...14/01/1075.jpg
Will need to modify the mud shield too as it fouls on the new brake lines.
https://www.aulro.com/afvb/images/im...14/01/1076.jpg
I've also been continuing work on soundproofing. I got some marine engine bay soundproofing, which is essentially a sheet of 4kg/sqm mass loaded vinyl sandwiched between two layers of open cell foam and clad in foil. I've used this on the bonnet where I'm not so worried about water, but will probably stick to the mass loaded vinyl and closed cell foam combination for the cabin.
https://www.aulro.com/afvb/images/im...14/01/1077.jpg
https://www.aulro.com/afvb/images/im...14/01/1078.jpg
In a couple of weeks I will get a longer fan belt and will have a go at firing up the engine for the first time in about 9 months. Then onto the fixing the rat eaten electrics.
cheers
Phin
Put a few things back together and turned the key for the first time in almost a year - fired first time!
I had some issues getting a belt for the new vacuum pump. Ended up redoing the mounts to get it to fit together. Finally got one that fit but the belt comes over the ridges of the pulleys. Is this going to be an issue?
https://www.aulro.com/afvb/images/im...014/02/553.jpg
I moved the donor camper over as it had been left under some grey boxes and I didn't want a branch coming though the roof.
https://www.aulro.com/afvb/images/im...014/02/554.jpg
cheers
I have a few days off so I'm trying to get as much back together as possible over the next few days.
I'm cheating with the swivels as the swivel balls are a bit pitted and I'm putting off rebuilding them for the time being. Got some semi fluid grease for around $50 for 3kg so should last a while. I got a big syringe from the vet to get the grease in. Trouble free and only took about 10 minutes all up.
https://www.aulro.com/afvb/images/im...14/03/1094.jpg
I also picked up 25 litres of gear oil, should do two Land Rovers and still be half full.
https://www.aulro.com/afvb/images/im...14/03/1095.jpg
Door tops are now painted up.
https://www.aulro.com/afvb/images/im...14/03/1065.jpg
https://www.aulro.com/afvb/images/im...14/03/1066.jpg
In other news I have sourced an original and very tidy Dormobile roof, which should be much nicer than my other camper roof. Now I have to get rid of the other camper roof. I think I have an addiction.
cheers
Picked up the Dormobile roof today. Will try to get some better photos tomorrow.
https://www.aulro.com/afvb/images/im...14/03/1041.jpg
https://www.aulro.com/afvb/images/im...14/03/1042.jpg
https://www.aulro.com/afvb/images/im...14/03/1043.jpg
Looks great, this is going to be a fantastic machine;)
Now how did I know you'd buy that roof phin :D
A good investment indeed, now if you want any dormobile bits to complete your restoration :angel:
Have a look at Terri Ann's site, she created a two door camper with dormobile bits.
Expedition Land Rover site