Thanks John.
All sorted.
whitehillbilly
Printable View
Thanks John.
All sorted.
whitehillbilly
Hi.
Rebuilt wiper motor cover.
A forum member sent me a 'Good' cover.
Sand blasting relieved few more holes.
So cut out the rust, and once again used my dear old dog, Luca's kennel Gal roof.
It never rusted after being out in the elements for 18 years. I bought it SH.
Happy with the finish.
Just couldn't stretch out vinyl, so had to add a pleat.
whitehillbilly
All done.
whitehillbilly
Spent the rest of the day, wire brushing the exhaust.
1.75 dia. is this STD. ????
Looks like it was Gal originally, Including muffler.
Cleaned up good. Only surface rust. May be Gal on the inside. Check tomorrow. If so modern replacemant, I guess.
Now nice and black.
Bit dark to take pics. Tomorrow.
whitehillbilly
I got mine from a Bursons store.Quote:
Originally Posted by whitehillbilly64
They have a range of ‘Z’ shaped hoses that suited.
Thanks John.
Got a part No ????
whitehillbilly
Sorry no part numbers. I got them a couple of years ago. But I just took a selection of old hoses in and they matched them for me.
I looked at the Z-shaped hoses at SuperCheap.Quote:
Originally Posted by whitehillbilly64
Found a better alternative, wandered into a self serve wreckers with some cutters and found lots of them on modern vehicles. Some were quite long and donated 2 or 3 bends.
Colin
Evening All.
Did my drive shafts today.
With no play in any of the 4 universals, decided to not touch them.
Just needed to clean off 50 years of grease and dirt. Easy.
7hrs later, finished.
The end plug had partly pushed out. Hydraulic lock maybe. Is that the correct word, To much grease with nowhere to go.
Method used for clutch bush.
Tapped back in place with punch. Water had got in. Know where now.
whitehillbilly
Hi.
How many brackets hold the exhaust on a S3 SWB
See hanger for rear below RH rear tub. One LH on chassis in front of rear diff. One LH just rear of gearbox cross member.
Thanks.
whitehillbilly