Gilbert

Thanks for replies.
So I tapped, with effort , the bushes back out. After tapping the old one in the old ball and taking some measurements.
One had picked up a burr as we pressed them in. The other seems to have stopped short.
I had used UK made bushes, but decided tho use the Brit part ones supplied with the balls.
I placed the balls in the oven for an Hr, the bushes in the freezer. But still they took some wacking in. Brit part clearances ????
All assembled, with a few extra shims. 10lbs of pull, RH, 11 on LH, as the inside wheels, take a bashing on our poor Tweed roads, on the scales I found hanging in the kitchen, returning the ones I had borrowed
Ordered some gaiters, so waiting on them before finishing the seals.

whitehillbilly

Quote:

---

Originally Posted by whitehillbilly64

Thanks for replies.
So I tapped, with effort , the bushes back out. After tapping the old one in the old ball and taking some measurements.
One had picked up a burr as we pressed them in. The other seems to have stopped short.
I had used UK made bushes, but decided tho use the Brit part ones supplied with the balls.
I placed the balls in the oven for an Hr, the bushes in the freezer. But still they took some wacking in. Brit part clearances ????
All assembled, with a few extra shims. 10lbs of pull, RH, 11 on LH, as the inside wheels, take a bashing on our poor Tweed roads, on the scales I found hanging in the kitchen, returning the ones I had borrowed
Ordered some gaiters, so waiting on them before finishing the seals.

whitehillbilly

---

They're looking real purdy. You've done an awesome job!

I used the Britpart kits to do mine - just did them at room temp and the went in ok with a few whacks of the hammer, I think they are supposed to be fairly tight I think, but if they're in there, then all good. :)

'Fairly Tight'
Under statement for mine.

whitehillbilly

You need a bigger hammer.... [bigwhistle][bigrolf]

Quote:

---

Originally Posted by whitehillbilly64

'Fairly Tight'
Under statement for mine.

whitehillbilly

---

Did u use rechromed balls or new ones?

Hi Rod. New.
Work on the bulkhead today. Very happy with efforts.
Loose paint removed, degrease and wipe down, and 3 coats of rust kill.

whitehillbilly

Once dry, some filler primer coats.
Another couple of filler coats, then Top coats. [bigsmile]
Cant believe how many purpose holes in the Bulkhead !!!!
Supra owner, Daughters 18 boyfriend, who self taught himself to spray paint , now has 15 cars to do.
He got the paint, last trip to the paint shop. He takes over painting from now on.
Just as well practice on Gilbert. [thumbsupbig]

whitehillbilly

I noticed on of the NutSerts that hold the steering column shaft is missing.
What can I do to make this nut usable ????
How easy is it to DIY, Nutserts ???? Anyone have one the correct thread ????
Thanks for the replies.

whitehillbilly

Was thinking of making some front floor mats from these.
Bayliss 40 x 70cm Black Rubber Circle Mat | Bunnings Warehouse
Anyone done it before ????

whitehillbilly