Try your local bearing shop, with a sample, first. When I overhauled mine, quite a few years ago now, the best source for parts was Rovers Down South in New Orleans, but seals and bearings were mostly available from the local bearing shop.
Printable View
Try your local bearing shop, with a sample, first. When I overhauled mine, quite a few years ago now, the best source for parts was Rovers Down South in New Orleans, but seals and bearings were mostly available from the local bearing shop.
Thanks John.
Went to local bearing place, used for 30 odd years.
Very over priced, but always helpful.
All young new faces, just was told we 'dont have that or that or that, maybe get that'
Never even measured the oil seals, or 'O' rings.
Maybe has changed hands ?
Walked out very unhappy and wont be walking back in the door again.
Very poor customer service. Sign of the times, or just getting Old.
Overseas order for Basic seals and bearings.
Large roller bearing ordered over the phone at Murwillumbah Repco. 'Not in stock, one here in the morning'
whitehillbilly
Sorry to hear that - does sound like it may have changed hands!
If the thrust bearings are 20x35x2 and 30x47x2 mm you can probably get them from RS Components in NSW.
.W.
Gilbert is coming 'HOME' (ster) [biggrin]
Just have to organise trailer.
Watch this space, lots of restored bits to go on.
Remember, Ssshhhhh.
You know who, may be watching.
whitehillbilly
Hopefully he’s too busy mucking around with his 101... [emoji6]
My spidey senses were tingling so course this is the first place I came... 😉Quote:
Originally Posted by whitehillbilly64
Only just got home so no 101 wok tonight. 😞
267412. Could someone please tell me if it attaches to the rear, RH gearbox bracket, lower or upper stud. the position fitted, and whether it goes onto or under the nut locking plate.
Thanks
whitehillbilly
I have look at mine when I get home if no one answers before thenQuote:
Originally Posted by whitehillbilly64
Mine is on the rear bottom nutQuote:
Originally Posted by whitehillbilly64
park brake works fine even thou the landy still has a long way to go to be finished https://uploads.tapatalk-cdn.com/201...0d716c61d9.jpg