Electric Fuel pump rubber mounting bushes

Quote:

---

Originally Posted by Blknight.aus

I'd second the nut and bolt wit ha cup washer method on this job, but you're going to hate yourself if you dont clean up the rust first. In this case a chaber brush from something in a bout 5.56 or .303 caliber would be ideal.

---

Hello Blknight,

Thank your concern about the chassis. Fortunately it is one that I have stripped down because it had terminal rust. The part shown in the photograph is about the most solid section of that whole chassis.

Kind Regards
Lionel

allow me to rephrase.

It doesnt matter what you've got the hole in, if you're putting a nutsert in and you dont clean up the hole properly before you insert the nutsert nd crimp it you're going to hate yourself later.

Quote:

---

Originally Posted by Blknight.aus

allow me to rephrase.

It doesnt matter what you've got the hole in, if you're putting a nutsert in and you dont clean up the hole properly before you insert the nutsert nd crimp it you're going to hate yourself later.

---

Hello BlKnight,

Okay I have got that loud and clear. Received and understood - Roger Wilco. Over and out :)

Kind Regards
Lionel