Thread: Power Steering conversion on Series 3 V8

Hi,
yes agree it is like some tractors used and that was an advantage as a very simple bolt on job--there are a number of LR's with this kit fitted--maybe someone who has one could comment too. I know of a 11A forward control also with this kit fitted.

I made my own from a Ford car valve unit and a ram from a disposal store. I think it was ex aircraft bomb bay door.
This was on my 2A Forward Control and about 25 years ago but it still works OK but I need the valving looked at I think. Its getting a bit leaky.

Keith

In Victoria the ram-type require engineering approval. It's dealt with in VBS14 (Vehicle Standards Bulletin 14 (VSB 14)) in Section LS

Screen Shot 2017-09-22 at 6.57.27 pm.jpg

Any type of power steering conversion will require engineering approval.

Late 60s Holdens and I think Fairlanes (dont know about Falcons) had ram style power steering when optioned.

Supermono

Is that Bill you are looking for

I sent Stephen H a PM

Unless of course you are Stephen H

Originally Posted by land864

Unless of course you are Stephen H

I resemble him very closely.