Try Mario (Roverlord) or the HoHars. Between them you'll have access to a whole lot of info
Hi all,
are there any locally available decent quality UJs for the front swivel half shafts?
Apparently the part number is RTC3690.
I think the free wheeling hubs caused mine to seize...well, almost.
Thanks,
Thomas
Try Mario (Roverlord) or the HoHars. Between them you'll have access to a whole lot of info
-----
You have the right to remain silent. Anything you say will be misquoted, then used against you.
-----
1999 Disco TD5 ("Bluey")
1996 Disco 300 TDi ("Slo-Mo")
1995 P38A 4.6 HSE ("The Limo")
1966 No 5 Trailer (ARN 173 075) soon to be camper
-----
Most of the UJ's around have seals as they are also used in the propshaft. With some designs when the seals are removed to allow the oil to get to the needle rollers the rollers can move around (seal acts as a retainer).
Not sure if you can get them without the seals.
If they have a grease nipple leaving the nipple out might allow oil to get to the rollers.
Maybe Hardy Spicer list them without seals ?
Colin
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
'58 Series II (sold)
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks