Results 1 to 10 of 10

Thread: Stage One interior trim

  1. #1
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0

    Stage One interior trim

    Gday, Anyone got a photo of a stage one ute interior from factory? My 81 tray tops interior is stripped other than the roof liner, Ive just re done all the Bailey channels, the seats are still in OK condition, but I'm searching for the trans tunnel and floor covers..Im assuming they are one piece?
    Ive had mine out of rego since I rebuilt the engine 13 months ago, booked in next week for an inspection, Cant wait to get it back on the road..

  2. #2
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    Head lining, dashpad and seats, Yep that sounds about everything.

  3. #3
    Join Date
    Mar 2008
    Location
    Wagga Wagga
    Posts
    352
    Total Downloaded
    0
    Series seats or 110 seats? Check my thread on my Stage One it should give you some ideas.

  4. #4
    Join Date
    Mar 2008
    Location
    Wagga Wagga
    Posts
    352
    Total Downloaded
    0
    Two photos I had on my computer at work. Transmission tunnel has a moulded cover over it.
    Attached Images Attached Images

  5. #5
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0

    Stage one is back on the road!

    Thanks for the interior info, I think Ill just cut some rubber floor mates to suit, its the first time Ive had the vehicle with all of the windows in place..Its actually quite pleasant in the cab!! The ute is running like a train, stroked to 4.2, straight gas, extractors and a 3in exhaust..it makes everyone look twice when it takes off!!F25ZgasXRTmxL+lxr8vskw.jpg

  6. #6
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,515
    Total Downloaded
    0
    The 81 I disassembled (not Stage 1 but it was also a ute) had headlining, sun visors, fitted bulkhead trim and fitted transmission tunnel cover plus floor mats. It also had door lining - if this was originally fitted the bottom frame of the door should have an added groove that the door card fits into.

    But note that the standard Series 3 was nothing except seats and padded dash, and what of the optional deluxe trim was added "as standard" for the local market was subject to change.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  7. #7
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    Quote Originally Posted by JDNSW View Post
    The 81 I disassembled (not Stage 1 but it was also a ute) had headlining, sun visors, fitted bulkhead trim and fitted transmission tunnel cover plus floor mats. It also had door lining - if this was originally fitted the bottom frame of the door should have an added groove that the door card fits into.

    But note that the standard Series 3 was nothing except seats and padded dash, and what of the optional deluxe trim was added "as standard" for the local market was subject to change.
    Was there ever a County (trimmed) ute made ?
    Last edited by pop058; 1st August 2018 at 08:25 PM. Reason: added clarification

  8. #8
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0
    Quote Originally Posted by JDNSW View Post
    The 81 I disassembled (not Stage 1 but it was also a ute) had headlining, sun visors, fitted bulkhead trim and fitted transmission tunnel cover plus floor mats. It also had door lining - if this was originally fitted the bottom frame of the door should have an added groove that the door card fits into.

    But note that the standard Series 3 was nothing except seats and padded dash, and what of the optional deluxe trim was added "as standard" for the local market was subject to change.
    Yes John, Mine has an added channel on the bottom of the doors, for a door card or similar.. anyone got a photo??

  9. #9
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,515
    Total Downloaded
    0
    Thinking about it since I wrote the above, as part of the headlining, there are upholstered panels from the headlining to the roof join, above the doors, above the windscreen and above the rear window. The cab, doors and most of the trim are now on my 2a. I'll see if I can get a picture and post it later today.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  10. #10
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0
    Did it originally have the Hardura covering for the transmission tunnel, bulkhead & seat surrounds etc. as in the wagons with DeLuxe trim ?

    Hardura Tunnel interior kit RHD | Exmoor Trim

    They state it doesn't fit the 6-cylinder and no Stage 1 listed. I haven't found a supplier of Hardura in Australia, plenty in the UK Hardura (Tuffelt Classic) | Trimming Materials


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!