I would think these have been custom fabricated.
Hey all,
would any of you know where to find roof racks like the ones pictured below?
Screen Shot 2020-07-28 at 7.05.30 pm.jpg
Cheers
I would think these have been custom fabricated.
Yes make them your self.
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
I guess its time to dust off the welder
You are a few weeks too late..i only recently sold one similar.
Be aware that roof racks mounted to the gutters on series Land Rovers squash all the rubbers between the roof/side sections and the tub.
The one i sold was fabricated from Steel and was a good solid unit, but rather heavy, so once loaded you end up with a fair amount of weight up there.
I have an Aluminium boat-rack to suit a series that is for sale.
It could be utilised/remodeled as the base for a roof rack.
Cheers, Mick.
1974 S3 88 Holden 186.
1971 S2A 88
1971 S2A 109 6 cyl. tray back.
1964 S2A 88 "Starfire Four" engine!
1972 S3 88 x 2
1959 S2 88 ARN 111-014
1959 S2 88 ARN 111-556
1988 Perentie 110 FFR ARN 48-728 steering now KLR PAS!
REMLR 88
1969 BSA Bantam B175
Gutter mounted.
Here are a few pics of it.
The front tapered down in line with series hardtop roof line.
It also had rollers on the rear to assist with loading a tinny onto it.
As well as a ladder that folded down the side and rested against a rear tire.
It was very well built, but very heavy to go with it.
Cheers, Mick.
1974 S3 88 Holden 186.
1971 S2A 88
1971 S2A 109 6 cyl. tray back.
1964 S2A 88 "Starfire Four" engine!
1972 S3 88 x 2
1959 S2 88 ARN 111-014
1959 S2 88 ARN 111-556
1988 Perentie 110 FFR ARN 48-728 steering now KLR PAS!
REMLR 88
1969 BSA Bantam B175
Mine's an original ''Brownchurch Rack'' fitted from new, wouldn't be too hard to make one
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks