Yer they would be the same but you can fit a v8 into a series without too many problems and you can just fit a booster to the brakes
Adam
Printable View
Yer they would be the same but you can fit a v8 into a series without too many problems and you can just fit a booster to the brakes
Adam
So close! Where's the roof lining from? What is it?
Can you let us know if you had or have any issues with the Disco Brake Booster installation?
Certainly will save me a LOT of headaches in the future.
I firmly intend to install a 4.0 or 4.6 with Disco 1 ZF auto into a Defender 110 SW.
Disco booster
http://s.dsimg.com/image/R-157663-1143495882.jpeg
Sorry :angel:
Its just clark rubber foam with a silver (ali) side (facing up) they have better type now I am buying more today so I will let you know how much.Quote:
Originally Posted by TJWA
Apart from butchering the pedal box all you need to do is make a suitable spacer up so the distance if pedal travel is the same.Quote:
Originally Posted by jakeslouw
As you can see the m/c is sloping forward so the next job is to put the roof back on the line up the body and modify the plate to the m/c sits level.
Adam
Started modifing the rear body for the lights
Warning purists turn away
https://www.aulro.com/afvb/images/im...10/12/1770.jpg
https://www.aulro.com/afvb/images/im...10/12/1771.jpg
https://www.aulro.com/afvb/images/im...10/12/1716.jpg
The cardboard will be replaced with either ali chk plt or just ali sheet
Adam
Looking good Adam!
If you use chequerplate you will need to mill/grind a flay area for the lights. Might look a bit dodgy?
Yep i was thinking the same so it will ne flat
Adam
hey butt not looked for awhile but it's looking good :cool:
when you hoping to have it all done