Printable View
Hiya All,
Been a while since I posted this and just thought I'd update on the cure.
After many attempted fixes, and thinking I'd sorted it twice...only to have it start re-ocurring, I noticed that when it stalled, the fuel gauge dropped.
Eureka moment - got a new ignition switch, and bob's your mother's brother, haven't had a problem for 2 weeks now!!:D
Thanks to all for your help and advice.
Cheers,
My old series 2a would cut out when you steered to the left :eek: Took ages to find out what was causing it :mad: There were no wires touching the steering what so ever!
In the end I took to it with a pair of wire cutters , and cut the lot out! Eventually found the problem to be broken wires in the main loom
Just a small amount of flex in the firewall was enough to stop ya dead in ya tracks:mad:
Glad i pulled the cutters out as a few other parts of the loom were just as bad!
Full rewire and it never missed a beat again.:D
Geez and I thought my problem was tricky - I think I probably would've lost my mind trying to figure that one out. ;)
Persistence is definitely the key to series ownership....and a small amount of insanity haha. :)