Thread: Engine mounts

Engine mounts - different position for all three engines, 4,6, Holden.

Note that as it was originally a six, not only are the engine mounts in the wrong place for a four, but the gearbox is further back and the bell housing is different.

To fit a four, the minimum would be to replace the bell housing and fit new engine mounts. To do a proper conversion to a four, you would need to do this plus move the gearbox forward, requiring new prop shafts, hand brake linkage, bulkhead and floor, plus other minor modifications.

I would be inclined to either sell it and get a four, or buy a four, perhaps with dodgy body, and transfer the good bits to it.

John