1418 prefix engines

The worlds second oldest known 2 litre petrol engine out of a Series two 141800211 turned up at my place yesterday fitted in a 1954 107.

There were 6 older ones sent to Australia on Feb 28 1958 if anyone can find them. up to number 170

It was cast on the 9th Feb 1958 over two months before the release of the Series 2 at the Amsterdam Motor Show on April 16 1958

https://www.aulro.com/afvb/images/im...013/01/364.jpg

https://www.aulro.com/afvb/images/im...011/11/141.jpg

It is fitted to this 1954 107 as a replacement

https://www.aulro.com/afvb/images/im...011/11/142.jpg

Cheers Richard

With the introduction of the 2 Litre 1418.... engines in Series 2s of 1958. There were a couple of changes to the oil Pump so they were not completely identical to the 2 Litre 1118..s in the series 1

1 The "oil pump body assembly" 501253

2 The "Drive shaft for the distributor" 267829

These parts had not been used on any previous model

Here is a photo from my original Jan 58 series 2 parts book TP199/A

https://www.aulro.com/afvb/images/im.../2011/11/2.jpg

https://www.aulro.com/afvb/images/im.../2011/11/3.jpg

Cheers Richard

https://www.aulro.com/afvb/images/im...012/09/506.jpg

https://www.aulro.com/afvb/images/im...012/09/507.jpg

Keith

No don't . :o
.

Hello,

Its very interesting to read your searching results for early Land Rovers.

I have engine 141800169 which I'm thinking of rebuilding to put into a
1953 80", its original engine is well worn out and will be expensive to overhaul.
Can you tell me what size bore this engine had originally, I'm having difficulty finding any details about it.

Thank you, Lyle

Quote:

---

Originally Posted by papadad

Hello,

Its very interesting to read your searching results for early Land Rovers.

I have engine 141800169 which I'm thinking of rebuilding to put into a
1953 80", its original engine is well worn out and will be expensive to overhaul.
Can you tell me what size bore this engine had originally, I'm having difficulty finding any details about it.

Thank you, Lyle

---

Hi Lyle,

The first batch of 6 Series 2 88 Standard (softtop) vehicles (143800001-06)arrived in Sydney on 22 August 1958 on the Geelong Star. Engine 141800169 was fitted to vehicle 143800002 with ign key 683 and supplied by Grenville Motors to Permewan Wright Ltd on 22.9.58.

Do you know where the vehicle is?

Bob

Wasnt the ANU fire engine 142800417 originally fitted with a 2 litre 1418 engine and now the owner is looking for an appropriate replacement for the holden engine?

Lyle: the 1418 engines are exactly the same specifications as the spread bore 1997 cc engines fitted to the late Series 1s. Your '53 80" and the '54 86" & 107" should have a siamese bore 1997 cc engine. The bore and stroke are the same on both 1997 engines but the bearings are different and the spread bore is a full flow oil filter system while the siamese bore in the '53s is still bypass the same as the other 80".

Depending how pedantic you want to be, the spread bore are more reliable, but are easy to detect because of the different location of the oil filter.

Quote:

---

Originally Posted by bulletproof

The worlds second oldest known 2 litre petrol engine out of a Series two 141800211 turned up at my place yesterday fitted in a 1954 107.

There were 6 older ones sent to Australia on Feb 28 1958 if anyone can find them. up to number 170...

---

I guess Lyle now gets the Mantle of "World's second oldest known 1418 engine", Sorry Bulletproof. :BigCry:

Quote:

---

Originally Posted by Lotz-A-Landies

Wasnt the ANU fire engine 142800417 originally fitted with a 2 litre 1418 engine and now the owner is looking for an appropriate replacement for the holden engine?

---

yes it did have 2L (eng no.141801829)(started production on the 19th May 1958, and was completed on the 23rd May 1958, delivered in Aust 25.7.58) but it now has a 2.25L engine - I am still working on it every week end. done the motor , gearbox, all the running gear. Just getting to radiator, exhaust & painting.

regards
Steve

I just found engine No.141800467 in my 1950 series 1 06114727 , can anyone let me know what this is out of and what size it could be?

Thanks Peter.

Quote:

---

Originally Posted by Proneon1964

I just found engine No.141800467 in my 1950 series 1 06114727 , can anyone let me know what this is out of and what size it could be?

Thanks Peter.

---

Hi Peter,

This engine was fitted to a 1958 Series 2 88" soft-top vehicle Chassis/Vehicle no. 143800091 supplied 25.9.58 to Midway Service Station, a local Land Rover agent, by Grenville Motors. It would be a 2 litre motor.

Your vehicle R06114727 was fitted with engine 06115126, key 586, supplied 26.10.50 to Cumberland Motors.

Bob