Thread: What work did you do on your Series Land Rover last weekend

Fitted the wide AT wheels. Fiddled with the brakes. I suspect almost every snail is stuffed!!

Originally Posted by Ratel10mm

Fitted the wide AT wheels. Fiddled with the brakes. I suspect almost every snail is stuffed!!

Gee I wish it was like that in my veggie garden. I keep having to put the beer trap out!

Originally Posted by Ratel10mm

Fitted the wide AT wheels. Fiddled with the brakes. I suspect almost every snail is stuffed!!

If the snail cam is running out of adjustment , I would be checking the inside diameter of the drums, as they are probably pass their usable limits.
.

my days of are like ground hog days....spray that oil remover on the leaky bits, motor, gearbox, diffs...... hose off and its done

Over the last few weeks or so, I have gone the hole hog, and taken the front axle apart, it was the best method for cleaning, and great fun

I have also been thinking of a better brake system and really like the remote servo unit, its not a S3 unit, and you dont have to change the pedal box over...


A few spares

Just put back in my seat supports! Someone had put in some non-landrover seats so I decided to get some new original style seats! Stick the old brackets back in because they were with the car. Only one little problem, there is one of the back rest supports missing!

There are plenty of you out there that have changed to nice plush seats, would anyone happen to have a bracket they wouldn't mind separating with?

Also installed the wheel retaining bracket that I got today. Loooooks good to me.

Ran out of fuel on the way home from the LROCS committee meeting last night. ops:
Luckily only 500 metres from home and a quarter of a jerry of stale unleaded to tide it over.

Also painted the springs with a diesel/sump oil mix, fed the security spider, adjusted all fluid levels and checked tyre pressures.

Originally Posted by isuzutoo-eh

Ran out of fuel on the way home from the LROCS committee meeting last night. ops:
Luckily only 500 metres from home and a quarter of a jerry of stale unleaded to tide it over.

Also painted the springs with a diesel/sump oil mix, fed the security spider, adjusted all fluid levels and checked tyre pressures.

Hi Mark - Did you use that tool I lent you to get the oil/diesel mix [B]between[B] the leaves of the springs?