G'day All,
Just re-read the thread and can report that when I fitted the roamer drive on my 2a 1966 in 2006 there was no excessive whine. When engaged at 80Km the noise level reduced so that you could have a normal conversation.
Very important to use a GL4 fully synthetic oil in the transfer box and O/D. I use Castrol Syntrans 75/85 GL4.
When installing the OD make sure the input gear of the O/D has clearance to the rear main shaft oil seal. I used a Viton 5/16" wide seal to get a clearance.
Chris
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks