Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: Series Gearbox ID

  1. #21
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    15,907

    Gearbox differences.

    I there a difference between the gearboxes fitted to the 4 and 6 cylinders? If so, any idea what they are?

    Thanks in advance.


    1977 101 FC - 'Chucky'
    1986 Classic RR - 'Thing'
    1976 Series III Tray
    1997 Honda CBR1000F
    2003 L322 - Gone to a new home.

    'Love with your heart - use your head for everything else.' - CaptainDisillusion

  2. #22
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    11,616
    Belhousing bolt pattern - Off the top of my head I think 4cyl is 12 o'clock and 6cyl is 11/1oclock.

    Gearstick - 4cyl is bent, 6cyl is straighter.

    As far as I know the other changes were S2a/S3 standard changes.
    Cheers
    Slunnie


    ~ Discovery II "Storm" ~ ~ Series IIa 6cyl ute ~ ~ Series II V8 ute ~

  3. #23
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    15,907
    Thanks. Are the bellhousings interchangeable? Also where are the identifying numbers on them to check what suffix and model they are?

    Cheers.


    1977 101 FC - 'Chucky'
    1986 Classic RR - 'Thing'
    1976 Series III Tray
    1997 Honda CBR1000F
    2003 L322 - Gone to a new home.

    'Love with your heart - use your head for everything else.' - CaptainDisillusion

  4. #24
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    22,745
    Gear lever has different bends. and bell housing is different. That's it. Ratios varied over time, but not according to the number of cylinders.

    Series 3 boxes are all synchro, and Series 1/2/2a only have synchro on 3/4, and the bell housing arrangement for the clutch release is different as well.

    But apart from these differences, boxes are pretty much interchangeable. There were detail changes throughout the life of the box (biggest one being the all synchromesh), mostly improvements, and the consensus is that the strongest box is late Series 2a, with late Series 3 not far behind.

    But apart from the bell housing differences (bolt pattern and clutch release arrangement) the boxes are all a bolt in swap.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  5. #25
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    11,616
    I havent tried to change the bellhousings, Lotzalandies or JDNSW may know. Re the numbers, check out this thread, there is some text and pics, there may be any combination of boxs/transfers.
    Series Gearbox ID
    Cheers
    Slunnie


    ~ Discovery II "Storm" ~ ~ Series IIa 6cyl ute ~ ~ Series II V8 ute ~

  6. #26
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    22,745
    I'm pretty certain bell housings can be swapped for 4 & 6 (but not S2/3), with the proviso that the layshaft diameter changed somewhere along the line, and they have to match.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  7. #27
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    15,907
    Thanks - didn't see that thread in the stickies, but I did run a search. That has most of the info I need at the moment. I have some options around the box for my project - the original is a suffix A - just found that, so will see what the other boxes I have access to are. 😊

    Will ask the mods to see if I can get this thread merged with the gearbox ID thread to keep all the info in 1 spot. 👍


    1977 101 FC - 'Chucky'
    1986 Classic RR - 'Thing'
    1976 Series III Tray
    1997 Honda CBR1000F
    2003 L322 - Gone to a new home.

    'Love with your heart - use your head for everything else.' - CaptainDisillusion

  8. #28
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Gold Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    15,907
    Ok, looked at some other boxes I may have options on. One is supposed to have been rebuilt at some point and due to there being no numbers on the box or TC this looks like it could be true. Guessing a later TC has been attached to an early box.

    So, still have some questions - which is better/stronger - an early box with no numbers or a suffix A series 3 box. Iím guessing the earlier box will have no synchro in 1st and 2nd whereas mine will, but what else should I be looking at? Current box is unknown although all gears did work, versus a potentially rebuilt (yet to be determined) earlier box? Will now going behind a 2.6 6 cylinder which will be fully rebuilt, and packing a few extra horses, although nothing big - hopefully around 100HP.


    1977 101 FC - 'Chucky'
    1986 Classic RR - 'Thing'
    1976 Series III Tray
    1997 Honda CBR1000F
    2003 L322 - Gone to a new home.

    'Love with your heart - use your head for everything else.' - CaptainDisillusion

Page 3 of 3 FirstFirst 123

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!