Results 1 to 4 of 4

Thread: part id help

  1. 24th December 2014, 02:34 PM #1
    SII Josh
    SII Josh is offline Master
    Join Date
    Jul 2013
    Location
    ravenswood, Western Australia
    Posts
    352
    Total Downloaded
    0

    part id help

    Hello everyone,

    i am in the process of replacing the rear main oil seal.

    is the part circled called the rear main bearing cap?

    i am using Haynes service and repair manual for guidance and am following the steps in the engine section #15 flywheel, flywheel housing and rear crankshaft oil seal - removal.

    cheers for your time and help so close to christmas
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 24th December 2014, 02:54 PM #2
    Lotz-A-Landies's Avatar
    Lotz-A-Landies
    Lotz-A-Landies is offline Super Moderator Gold Subscriber
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    The rear main bearing cap in the part outlined in red.

    It bolts up from the bottom to hold the lower half shell of the 2 half shells which form the main bearing.

    What you have circled holds the rear oil seal, which on an SII may still be a rope seal.
    Attached Images Attached Images

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
    Reply With Quote Reply With Quote
  3. 31st December 2014, 10:14 AM #3
    SII Josh
    SII Josh is offline Master
    Join Date
    Jul 2013
    Location
    ravenswood, Western Australia
    Posts
    352
    Total Downloaded
    0
    cheers Lotz,

    any idea how to remove the rear main bearing cap?

    haynes workshop manual says to remove two retaining bolts and tap out using a soft alloy drift, where are the retaining bolts located?

    cheers again for all the assistance, especially being the last day of 2014
    happy new year to everyone
    Reply With Quote Reply With Quote
  4. 5th January 2015, 10:48 AM #4
    Lotz-A-Landies's Avatar
    Lotz-A-Landies
    Lotz-A-Landies is offline Super Moderator Gold Subscriber
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,662
    Total Downloaded
    1.20 MB
    Hi Josh

    Sorry I missed your post. To remove the bearing cap, first you need to remove the sump. Then all will reveal itself.

    The bolts are vertical up from the bottom.

    Diana

    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.
    Reply With Quote Reply With Quote
« 2a engine into 1955 s1 | 1H9077 Headlight Switch »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!