Results 1 to 5 of 5

Thread: De Luxe Bonnet

  1. #1
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0

    De Luxe Bonnet

    I've got a De Luxe bonnet on the Dormobile which would have been standard for wagons ? It's the dished type for the spare wheel.
    Just collected another De Luxe bonnet today and this one isn't dished for the spare wheel. Also it's assembled with solid rivets (not pop-rivets) which means Series II ?

    Were they an option on other models ?

    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  2. #2
    Join Date
    May 2009
    Location
    Austral, Sydney, NSW
    Posts
    285
    Total Downloaded
    0
    Quote Originally Posted by gromit View Post
    I've got a De Luxe bonnet on the Dormobile which would have been standard for wagons ? It's the dished type for the spare wheel.
    Just collected another De Luxe bonnet today and this one isn't dished for the spare wheel. Also it's assembled with solid rivets (not pop-rivets) which means Series II ?

    Were they an option on other models ?

    Colin
    I have a Deluxe bonnet on my 1978 shorty. It doesn't have the dish recess, but does sport the spare wheel mount. And I did have the spare wheel there for years.. Also it has been assembled with solid rivets.

    Wolf
    1972 - S3 LWB (109) Wagon - Parts
    1974 - S3 LWB (109) Wagon - Jess - (Registered)
    1975 - S3 LWB (109) Wagon - Parts
    1978 - S3 LWB (109) Wagon - Parts
    1979 - S3 SWB (88) Utility - Aurora (TBR)
    2014 - Defender (110) - Cher (MY15)

  3. #3
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,512
    Total Downloaded
    0
    Deluxe bonnet (without wheel recess), as far as I can make out, was standard on all lwb from Series 2a on, except for station wagon where the deluxe bonnet with wheel recess was standard both swb and lwb. Standard bonnet was optional on all models as was the deluxe bonnet with wheel recess.

    Deluxe bonnets with a wheel recess are quite rare in Australia except on station wagons, but deluxe bonnets without the recess but with the spare mount are common.

    Military vehicles tend to mostly have the standard bonnet.

    Swb after early S3, at least in Australia, had the deluxe bonnet - I think the standard bonnet was considered pedestrian unfriendly.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  4. #4
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,796
    Total Downloaded
    0
    The one I've just got that doesn't have the recess also doesn't have the spare wheel mount or holes for a wheel mount.
    Instead there is a base for a CB ariel in the middle of the bonnet !

    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  5. #5
    Join Date
    Jul 2012
    Location
    Brisbane
    Posts
    2,419
    Total Downloaded
    0

    Depends on specification

    Quote Originally Posted by gromit View Post
    The one I've just got that doesn't have the recess also doesn't have the spare wheel mount or holes for a wheel mount.

    Colin
    Hello from Brisbane.

    Most of the trucks that were sold new in Australia came with a bonnet mount for the spare wheel - although this was not mandatory, just the way they were commonly delivered. Strictly speaking the bonnet mounted wheel carrier was an accessory that was meant to be specified for an order.

    The two door 109" trucks were designed to have the wheel carried in the tub and a few likely came without the wheel mount on the bonnet. Others, especially with the full hard top, came with a swing out rear door which also usually had a rear mounted wheel carrier.

    So, conceivably the bonnet that you now have might have come via one of those pathways. Or off an import.

    Cheers,

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!