Results 1 to 5 of 5

Thread: Series springs

  1. 1st March 2015, 04:03 PM #1
    will d8r's Avatar
    will d8r
    will d8r is offline Master
    Join Date
    Nov 2009
    Location
    Northern NSW
    Posts
    120
    Total Downloaded
    0

    Series springs

    Will this work.I have a new set of rear 88 springs will they work in a 109.I know they have a lesser capacity but the 109 never carries anything heavy, just need a bit softer ride.
    Reply With Quote Reply With Quote
  2. 1st March 2015, 04:07 PM #2
    67hardtop's Avatar
    67hardtop
    67hardtop is offline ChatterBox
    Join Date
    Apr 2014
    Location
    Blair Athol, Adelaide South Aust.
    Posts
    2,745
    Total Downloaded
    0
    Nope. Dont think so.Too narrow and short

    Sent from my GT-P5110 using AULRO mobile app
    Reply With Quote Reply With Quote
  3. 1st March 2015, 05:53 PM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,512
    Total Downloaded
    0
    Actually, according to the workshop manual the distance between chassis bush centres is identical between the 88 and 109. And the width is the same on all Series except early 80". So they ought to fit, although the bushes on the 109 are 1/4" lower relative to the chassis datum than on the 88.

    However, don't forget that even when running unloaded there is a substantial weight of chassis and body above that of the 88 on the rear springs compared to the 88. So you could not expect to carry even the load that an 88 could carry.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  4. 22nd March 2015, 11:53 AM #4
    will d8r's Avatar
    will d8r
    will d8r is offline Master
    Join Date
    Nov 2009
    Location
    Northern NSW
    Posts
    120
    Total Downloaded
    0
    I put the new springs in they are higher can't get in the shed now.It still rides a little harsh compared with my 88.May have to look at tyres & tyre pressures but it certainly looks a lot better.
    Cheers Bill
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  5. 22nd March 2015, 02:28 PM #5
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,512
    Total Downloaded
    0
    Unless it either is well loaded or has station wagon springs, a 109 is always going to ride rougher than an 88. For the basic petrol model the 109 only weighs 158kg (11%) more than the 88, but has a disposable load 454kg (100%) more.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« Reinforced Rover front axle casing | Renovating Leaf Springs »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!