gear lever and gear selection

Thanks for the advice gents,

Definitely the selector forks...

The pinch bolts were very worn with much of the thread flattened out. No locking compound on them either.

cheers ianAttachment 124699

More pics and info on the Gearbox breather set up please.

whitehillbilly

On top, at the rear of the top cover of the gearbox is a rectangular plate held by two screws. It has a small hole in it. This is the gearbox breather.

Hi John.
Was looking at Incisors Extra bits and tubes, attached to the gearbox.

whitehillbilly