Anyone in Aus making these repair sections yet.
Thanks.
Whitehillbilly
Cheap enough from the UK plus all the usual local suppliers carry them.
Door Bottom repair piece - Paddock Spares
Might be worth trying a sheet metal works but for a limited quantity it may work out more expensive.
Colin
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
'58 Series II (sold)
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C
Thanks Colin.
I found these.
LM150 - Repair Section Door Bottom Defender 90/110 Series 2/3 3 Feet in Length
whitehillbilly
Defender ones are a different profile to Series ! Not sure why they are listed for both Defender & Series.
OK Maybe it's Defender rear doors SERIES FRONT DOOR / DEF REAR DOOR BOTTOM REPAIR SECTION
Colin
Last edited by gromit; 18th April 2018 at 07:16 PM. Reason: More info added
'56 Series 1 with homemade welder
'65 Series IIa Dormobile
'70 SIIa GS
'76 SIII 88" (Isuzu C240)
'81 SIII FFR
'95 Defender Tanami
'58 Series II (sold)
Motorcycles :-
Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C
Made this test-piece yesterday for Shane; starting production soon,
Shared album - Charlie Myres - Google Photos
Cheers Charlie
Thank you Charlie,
For doing the test run for me.
The Gal sections, are an improvement on the OS ones available.
I cannot find drain holes, on the doors I have. So these would improve things also.
Finished section will be, as per Original profile, with flat plate spot welded to 'Top Hat' section.
Looking forward to receiving mine.
Colin needs to get his order in..
Thanks again, for the time put in experimenting.
Whitehillbilly.
Search AULRO.com ONLY! |
Search All the Web! |
---|
|
|
Bookmarks