Results 1 to 8 of 8

Thread: Faulty Part.

  1. #1
    Join Date
    Oct 2014
    Location
    Northern NSW.Australia
    Posts
    1,970
    Total Downloaded
    0

    Faulty Part.

    Thought might be worth posting from a UK Forum.

    whitehillbilly



    Started fitting the wheel cylinder. No nuts supplied with the replacement. Given everything anywhere near the wheels corrodes severely and they are an imperial size this is quite annoying.

    Eventually find four nuts and tighten the new cylinder on using a small half Inch spanner. With a tiny amount of force the Stud stripped right out of the cylinder.

    Needless to say this is a britpart cylinder. On inspection the stud isnt a stud. Its not actually threaded onto the cylinder Just shoved onto a three mm deep hole.

    This is absolutely disgraceful. This is a safety critical part. I thought britpart stuff was improving but they should frankly be brought up on charges for this. It can't possibly pass any safety standards.

    To be clear, that's not a snapped stud. The slight marking at the end was just where I gripped it to remove the nut. The hole it goes into is perfectly flat and looks like it was cast like that and there are no threads. The cylinder I took off was threaded down about three quarters of an inch.
    Attached Images Attached Images

  2. #2
    Join Date
    Dec 2006
    Location
    Narrogin WA
    Posts
    3,092
    Total Downloaded
    0
    I have melted old wheel cylinders in my furnace when doing casting and the studs which have been fished out of the crucible, all had a Tee-heads on them so that they could never pull out,

    Cheers Charlie

  3. #3
    Join Date
    May 2016
    Location
    Guanaba, QLD
    Posts
    462
    Total Downloaded
    0
    I am lost for words...

  4. #4
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    So when it comes to purchasing parts what was the lesson?

  5. #5
    Join Date
    Jul 2016
    Location
    Gold Coast
    Posts
    520
    Total Downloaded
    0
    Which UK forum was that on ? I'd like to see the follow-up and any response from Britpart as I'm about to install Britpart slaves myself.

    Cheers,
    John

  6. #6
    Join Date
    Mar 2007
    Location
    Warwick Qld
    Posts
    1,977
    Total Downloaded
    0
    Quote Originally Posted by djam1 View Post
    So when it comes to purchasing parts what was the lesson?
    Buy all the parts you're after from Roverlord. They have so much experience with various aftermarket parts, and seem to know which brands to steer clear of in relation to certain parts.
    -----
    You have the right to remain silent. Anything you say will be misquoted, then used against you.
    -----

    1999 Disco TD5 ("Bluey")
    1996 Disco 300 TDi ("Slo-Mo")
    1995 P38A 4.6 HSE ("The Limo")
    1966 No 5 Trailer (ARN 173 075) soon to be camper
    -----

  7. #7
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,314
    Total Downloaded
    0
    Haven't had problems with Britpart/Bearmach in the past, might just be a one-off.
    I guess from what Charlie said that they put the T-headed studs into the mould and cast so someone inserted a stud with no T-head. Not acceptable but these sort of things happen in mass production, more-so with cheaper parts

    With companies like Paddocks you can select a brand (Delphi or TRW) instead of Britpart, more expensive but I guess you get what you pay for.


    Colin
    Last edited by pop058; 24th April 2018 at 08:13 PM. Reason: Sp.
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    '58 Series II (sold)
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C

  8. #8
    Join Date
    Jul 2016
    Location
    Gold Coast
    Posts
    520
    Total Downloaded
    0
    This weekend I installed two Britomart slaves, no problem at all. Although I have tried other Britomart parts I wasn't impressed with like tie rod ends that trusted in about a month.

    Cheers
    John

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!