-
29th October 2018, 08:02 PM
#1
Water temperature sensor(s) on 2.25 L petrol engine
Hi All,
I was looking around at the wiring going to the engine on the weekend, and I noticed that I seem to have two sensor connections near the water pump that I can only assume are both for water temperature. I haven't traced the wires back to the dashboard yet but I only have one temp gauge, so I thought I would throw it our to the forum for any insight into these two sensors, see the pics attached.
P1100491.jpgP1100492.jpg
Thanks
John
-
29th October 2018, 08:15 PM
#2
I think the one in the Righthand picture is for cold start switch/light
Cheers Paul
-
29th October 2018, 11:23 PM
#3
Paul is correct. The sender unit next to the spark plug is for the gauge. The one on the other side with 3 bolts holding it in is for the cold start light connected to the choke cable and the yellow light on ur dash.
Cheers Rod
-
30th October 2018, 10:39 AM
#4
Ah yes, that makes sense - thanks guys !!
Cheers,
John
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks