Thread: Which fasteners to use for transfer case lever rubber retainer

Originally Posted by JohnboyLandy

Hi All,

There are three holes on the floor to hold the metal retainer bracket for the transfer lever rubber boot. It's not clear to be whether I should use the same floor screws or something else. In other locations where the floor screws are used such as on the gearbox cover have a recess for the spire nut, but not for the holes in the retainer bracket. So do I just use the same spire nuts despite no recess, or use something else ?

See pic attached IMG_20190430_113908.jpg

Any advice appreciated !!

Cheers,
John

Same floor screws

Colin

I used the floor screws.
Got a few, new, extras if short.
Plus captives.

whitehillbilly