Originally Posted by
JohnboyLandy
Hi All,
Just looking at my brakes and how to make them as best they can be, so I have a question about the brake booster hose and the weber card I have.
I noticed that the booster hose is connected to the carb with a junction shared with the crank case emission valve, so I'm concerned that I'm not getting full vacuum for the booster with this shared arrangement.
pics :
IMG_20190522_100417.jpgIMG_20190522_100400.jpg
I've tried to highlight the junction in the pics with a red circle.
Any thoughts on this arrangement ?
Thanks
John
My series 3 intake has a blank in it which I would of imagined would of been for vacuum for brakes I could be wrong not the best pic but you can see it in front of carby
1960 series 2 143001010
1976 series 3 91331709c
98 discovery 300tdi manual
06 discovery v6
2010 cub supamatic drover
Bookmarks