No personal experience but that’s what I was referring to.
You can’t cut with it but you can weld, braze and heat
No deposit is good news
Printable View
No personal experience but that’s what I was referring to.
You can’t cut with it but you can weld, braze and heat
No deposit is good news
Terribly. Those Oxy cylinders are expensive and hold SFA. There are 2 variants and only one of them has a regulator on the oxygen, the other just uses a valve which means over the ~5-7 minutes of use you get out of the bottle the mix keeps changing. They are an OEM version of the BernzoMatic unit and they get awful reviews from people trying to use them seriously.Quote:
Originally Posted by whitehillbilly64
I use a variant of this one : K075 - 1811167K Professional Oxyset Portable Brazing & Welding System Package Deal | Hare & Forbes Machineryhouse that I bought at Actrol years ago. It has proper regulators on both bottles with pressure gauges (its manufactured by "OxyTurbo" in Italy).
I use a Bunnings D sized oxy bottle with a CIG reg on the oxygen side. The Propylene lasts ok for my use. If I need to get on/in the roof I just use one of the disposable bottles with the original oxygen regulator, but at ~$45 for about 10 minutes use they are expensive.
those things are good for a one off, or a few small braize ups but thats about it.
for 90$% of engine removeybrokostudorbolts I use
BTS8023 Hot Devil Blow Torch Suit HD200C Butane Gas | Accessories - TradeTools | Huge Range, Great Service
one of them, the proper gas works better but is a touch exxy for 70% of what I use it for the cheap about $2/can cans from almost any shop work well enough.