Stickers Poll

[timbo]

Vote away gents!

I didn't include the 'everything else is crap' one because of what inc said about profanity, and also we only have ten poll options to use.

Don't follow me, you won't make it.

Sniff my diff

Climbs 1:1, 45degree tipping angle, 2200lb load capacity, 4 tonnes tow, aluminium body, holds recommended value, 25+ models, many originals still at work, petrol or diesel, no.1 4x4

In a Land Rover, the other vehicle is your crumple zone

Free SRS and crumple zone testing here
Tailgate to initiate test procedure

Of course it's environmentally friendly,
It's been returning oil to the ground for years!

Beer, Rugby, Land Rovers; what else is there?

Land Rover.... You can go fast, I can go anywhere.

ENOZ ELPMURC YM ERA UOY

If you think my landy's dirty, you should spend a night with the driver!

[isuzutoo-eh]

Why is there metric and imperial measurements in the same sentence?

Do you have any mock ups to see what they'll look like?

[timbo]

I should also mention that you can choose more than one option.

I'm sure if enough people want the metric/imperial sticker, it can be changed to all metric (or all imperial for the Series owners)

[timbo]

I don't have any mock ups, no. If Dave is feeling nice and creative, he might oblige though!

[tomalophicon]

You can all Sniff my Diff.

[ramblingboy42]

I hate stickers all over vehicles......and I've got 4 on the back of mine

[timbo]

I hate stickers all over vehicles......and I've got 4 on the back of mine

That being said, they don't necessarily need to go on the car.

[digger]

Why is there metric and imperial measurements in the same sentence?

Do you have any mock ups to see what they'll look like?

a) because they cover from 1948 to now!!! (and its just like a landy, 12mm here, 1/2 ww here, 1/8 imp here....)


b) see my sig line (yep just under this)

[Bigbjorn]

[QUOTE=isuzutoo-eh;1654893]Why is there metric and imperial measurements in the same sentence?

QUOTE]

Possibly because the older members don't speak wog.

Ever hear fitters speak about clearances on say a 25mm shaft? Usually given in thousandths of an inch.

Machinist - "How much slack do you want on this one, Jack."

Fitter - " On 25 mil. About a thou and a half"

Machinist - " OK, finger in a bum fit?"

Fitter - "Yeah, that will do. Nice sliding fit."

[timbo]

[quote=Brian Hjelm;1655093]

Why is there metric and imperial measurements in the same sentence?

QUOTE]

Possibly because the older members don't speak wog.

Ever hear fitters speak about clearances on say a 25mm shaft? Usually given in thousandths of an inch.

Machinist - "How much slack do you want on this one, Jack."

Fitter - " On 25 mil. About a thou and a half"

Machinist - " OK, finger in a bum fit?"

Fitter - "Yeah, that will do. Nice sliding fit."

how homoerotic.