Results 1 to 5 of 5

Thread: Fitting 2a metal grille to series 3 - how?

  1. #1
    Join Date
    Sep 2010
    Location
    Qld
    Posts
    806
    Total Downloaded
    0

    Fitting 2a metal grille to series 3 - how?

    I have a late series 2a metal grille which I would like to fit to my series 3 to replace the plastic one which looks a bit shabby after years in the weather. Obviously the grille will fit straight on size wise, but what fittings are used on a 2a to attach the grille to the radiator support panel? The plastic grille uses screws through holes but there are no tabs for these on the metal grille. I want to avoid just using screws with washers (unless this is how it was done) and I realise it may need additional mounting holes in the support panel, so does anyone have any pictures of what the fittings look like so I can track some down or fabricate something?

    Thanks in advance.

  2. #2
    Join Date
    Dec 2006
    Location
    Barmera .SA.
    Posts
    1,841
    Total Downloaded
    0
    Not had a good look at both grills side by side, but, it should be possible to (carefully) weld some mounting tabs to the S2 grill that line up with the S3 screw holes.
    This is an idea I have had for a while myself, I like the metal grill, been considering the same minor mod to my S3.

  3. #3
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    Quote Originally Posted by pfillery View Post
    I have a late series 2a metal grille which I would like to fit to my series 3 to replace the plastic one which looks a bit shabby after years in the weather. Obviously the grille will fit straight on size wise, but what fittings are used on a 2a to attach the grille to the radiator support panel? The plastic grille uses screws through holes but there are no tabs for these on the metal grille. I want to avoid just using screws with washers (unless this is how it was done) and I realise it may need additional mounting holes in the support panel, so does anyone have any pictures of what the fittings look like so I can track some down or fabricate something?

    Thanks in advance.
    The 2 screws that hold the Landy badge on are used to retain the top of the metal grille. the bottom of the grille sits in "keepers" on the radiator support panel (arrowed in pics).
    Attached Images Attached Images

  4. #4
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,794
    Total Downloaded
    0
    As pop 058 said.....





    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  5. #5
    Join Date
    Nov 2007
    Location
    Gold coast
    Posts
    3,130
    Total Downloaded
    0
    You can use part numbers

    330150 support clip for grill x2 you will also need x4 300789 rivits.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!