Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Rear ladder supplier

  1. 19th June 2013, 05:30 AM #1
    Robsrod 58
    Robsrod 58 is offline Master
    Join Date
    Apr 2012
    Location
    Engadine NSW
    Posts
    204
    Total Downloaded
    0

    Rear ladder supplier

    For any one that wants a rear ladder for their P38, "Voyager Off road LLC" in Florida will post for a reasonable $45US. All up around $250 Au at current exchange rates and accepts PayPal

    I bought one a few days ago, will post follow up when received.

    Also, they only make products for Landies and are looking for AUS distributers if anyone can assist, the guy to talk to is Andy Nix at Voyager.

    Rob
    Reply With Quote Reply With Quote
  2. 19th June 2013, 12:26 PM #2
    intheozone's Avatar
    intheozone
    intheozone is offline Master
    Join Date
    Dec 2012
    Location
    Perth, WA
    Posts
    112
    Total Downloaded
    0
    Will be interested to see how long the delivery time is. I was thinking of ordering rock sliders from the US
    Reply With Quote Reply With Quote
  3. 2nd July 2013, 06:21 AM #3
    Robsrod 58
    Robsrod 58 is offline Master
    Join Date
    Apr 2012
    Location
    Engadine NSW
    Posts
    204
    Total Downloaded
    0
    Quote Originally Posted by intheozone View Post
    Will be interested to see how long the delivery time is. I was thinking of ordering rock sliders from the US
    Ladder came today 2/7/13 so about 3 weeks for delivery from Florida, came with all fixings and instructions. It was very well packaged and looks like a quality product.

    Will post pics when fitted.

    Rob
    Reply With Quote Reply With Quote
  4. 6th July 2013, 02:27 PM #4
    Robsrod 58
    Robsrod 58 is offline Master
    Join Date
    Apr 2012
    Location
    Engadine NSW
    Posts
    204
    Total Downloaded
    0
    The finished ladder, but I used rivnuts instead of the supplied fasteners. It came up pretty good I think.

    Rob
    Last edited by Robsrod 58; 10th May 2015 at 06:43 AM.
    Reply With Quote Reply With Quote
  5. 6th July 2013, 04:47 PM #5
    davidsonsm's Avatar
    davidsonsm
    davidsonsm is offline Wizard
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    Do you know if these are handed? Would it fit on right hand side? Looks good.
    Reply With Quote Reply With Quote
  6. 6th July 2013, 05:27 PM #6
    bruce p38's Avatar
    bruce p38
    bruce p38 is offline Master
    Join Date
    Jun 2012
    Location
    Carrum Victoria Australia
    Posts
    104
    Total Downloaded
    0
    Looks great Im getting one The Missus asked me what I wanted for my birthday an for once my mind didn't go blank !! But ditto the handed ? from Davidsonsm as my spares on the left !

    I like your new decals. I did the same except black on dark green after the so called original new decals sprayed off at the car wash

    Cheers

    Bp38
    Reply With Quote Reply With Quote
  7. 6th July 2013, 09:25 PM #7
    Robsrod 58
    Robsrod 58 is offline Master
    Join Date
    Apr 2012
    Location
    Engadine NSW
    Posts
    204
    Total Downloaded
    0
    Quote Originally Posted by davidsonsm View Post
    Do you know if these are handed? Would it fit on right hand side? Looks good.
    No, They are left handed, I know, your spare is on the left side.
    Andy from "Voyager offroad LLC" seems a really nice guy and is intent on the Aus market. Email him via his website, see what he says about a right hand one. Would think just swapping the welds around,no extra fab work!
    Just a thought, how much clearance do you have between the spare and the tailgate you need about 115mm clearance to use the one I have. Ditto for "Bruce p38"

    Rob
    Reply With Quote Reply With Quote
  8. 9th July 2013, 01:19 PM #8
    davidsonsm's Avatar
    davidsonsm
    davidsonsm is offline Wizard
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    Not a lot of clearance. I made the assembly angle backwards around 10° to 15° to make it sit closer and for aesthetics. So I've just got enough space for the telescopic spotlight. I've emailed to see if a right hand version is an option.
    Reply With Quote Reply With Quote
  9. 10th July 2013, 06:57 AM #9
    bruce p38's Avatar
    bruce p38
    bruce p38 is offline Master
    Join Date
    Jun 2012
    Location
    Carrum Victoria Australia
    Posts
    104
    Total Downloaded
    0
    Please post result re r/h ladder inquiry as I'm keen also
    Thanks Davidsonsm That winch bar of yours looks awesome !
    I'm annoyed I bought a factory scrub bar s/h Maybe one day
    Reply With Quote Reply With Quote
  10. 15th July 2013, 08:45 PM #10
    davidsonsm's Avatar
    davidsonsm
    davidsonsm is offline Wizard
    Join Date
    Feb 2012
    Location
    Carnegie
    Posts
    1,226
    Total Downloaded
    0
    Not heard back from them yet. Will send follow up.
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Suppliers and Fabricators webpage | SWITCH PACK »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!