Results 1 to 4 of 4

Thread: DavecandoIT Range Rover Traxide Kit Install

  1. #1
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,688
    Total Downloaded
    32.38 MB

    DavecandoIT Range Rover Traxide Kit Install

    Traxide Kit install into a 2013 Range Rover


    traxideecclesRRS4 by NiknoDave, on Flickr



    traxideecclesRRS3 by NiknoDave, on Flickr


    traxideecclesRRS2 by NiknoDave, on Flickr


    traxideecclesRRS1 by NiknoDave, on Flickr


    traxideecclesRRS0 by NiknoDave, on Flickr

    need a Traxide kit installed and your on the Northside of Brisbane?
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  2. #2
    Join Date
    Feb 2006
    Location
    gosford
    Posts
    824
    Total Downloaded
    0
    Slightly changing the thread can anyone tell me are those 20" rims and are they A/T's if so what make of tyre?

  3. #3
    Join Date
    Jan 1970
    Location
    Bangor, NSW
    Posts
    1,508
    Total Downloaded
    0

  4. #4
    Join Date
    Oct 2011
    Location
    Sunshine Coast
    Posts
    1,224
    Total Downloaded
    0
    Cooper Zeon LTZ 275/45 R 20's. Just came back from trip to Moreton they worked great. Dropped them to 20psi no issues. Went past a Prado that had just been snatched out at Blue Lagoon. While we were looking at the section the Prado owner tell's the car travelling with us, a 100 Series cruiser, that the cruiser might make it but not the RRS. Of course we prove him wrong with an easy run up and over. We could have dropped to 18psi i think without issues and will in future for sand work. Re noise there is a slight hum on road compared with Continental's or Hankook Ventus ST's previously used on the RRS however given the A/T nature of the tyre, am well happy. Also well happy with Traxide and Dave's work.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!