Results 1 to 7 of 7

Thread: s1 ute circa 1956

  1. #1
    Join Date
    Mar 2010
    Location
    victoria
    Posts
    270
    Total Downloaded
    0

    s1 ute circa 1956

    Hi All,

    Introducing my latest acquisition, a 1956 Series 1 ute.


    An extra big thanks to Mick_Marsh for lending his trailer so I could get it home.

    Car looks pretty good. Some rust in firewall/bulkhead but otherwise appears ok.

    Looks like an original motor. The engine model number 212192 seems about right although I haven't chased up the engine and chassis numbers yet.

    Apart from the accumulation of dust and the paint flaking off the roof lining, the interior looks to be in great condition. The seats look almost new and it's even got the horn insert.

    My first question is about the canopy which is sitting on the ute tub back to front. I think its an after market job as it is made of steel and quite rusted. Anyone know if they were an original option?

    cheers

    Wayne
    Attached Images Attached Images

  2. #2
    Join Date
    Apr 2011
    Location
    Wandong,Victoria,Australia
    Posts
    3,379
    Total Downloaded
    0
    Hi Mate,

    I don't know how I missed this thread....

    I can't answer your question but I would say that you are correct it appears to be an after market because:

    a) It's made out of steel (hence the bad rust)
    b) It almost looks like the canopy is on "back to front"??

    Nice find..
    88 Perentie FFR - Club Rego
    93 Discovery 1 200 Tdi - Club Rego
    03 130 Td5 Single Cab
    06 Discovery 3 Petrol
    22 Defender 90 - Full rego

  3. #3
    Join Date
    Jun 2009
    Location
    australia
    Posts
    904
    Total Downloaded
    0
    Quote Originally Posted by BreakingBad View Post
    Hi All,

    Introducing my latest acquisition, a 1956 Series 1 ute.

    no tthat model came with bows and a tarp jim
    An extra big thanks to Mick_Marsh for lending his trailer so I could get it home.

    Car looks pretty good. Some rust in firewall/bulkhead but otherwise appears ok.

    Looks like an original motor. The engine model number 212192 seems about right although I haven't chased up the engine and chassis numbers yet.

    Apart from the accumulation of dust and the paint flaking off the roof lining, the interior looks to be in great condition. The seats look almost new and it's even got the horn insert.

    My first question is about the canopy which is sitting on the ute tub back to front. I think its an after market job as it is made of steel and quite rusted. Anyone know if they were an original option?

    cheers

    Wayne
    no that model came with atarp and bows jim
    Russell Rovers
    Series I Parts Specialists
    russellrovers AT gmail.com
    Phone 0428732001

  4. #4
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,101
    Total Downloaded
    0
    I've been waiting for this thread in eager anticipation, and I find out it's now old news!

    Well done. It looks a beauty.

    When will I read about the other one?

  5. #5
    Join Date
    Sep 2007
    Location
    RIVERLAND, SOUTH AUSTRALIA
    Posts
    6,740
    Total Downloaded
    0
    Quote Originally Posted by grey_ghost View Post
    Hi Mate,

    I don't know how I missed this thread....

    I can't answer your question but I would say that you are correct it appears to be an after market because:

    a) It's made out of steel (hence the bad rust)
    b) It almost looks like the canopy is on "back to front"??

    Nice find..
    I may be wrong but looks like placed that way for trasnporting the car, there is definately a rear door at the front.

    Its a nice find... this deep slate blue is a great colour, its the colour mine should be... how does it run?

    cheers
    (REMLR 235/MVCA 9) 80" -'49.(RUST), -'50 & '52. (53-parts) 88" -57 s1, -'63 -s2a -GS x 2-"Horrie"-112-769, "Vet"-112-429(-Vietnam-PRE 1ATF '65) ('66, s2a-as UN CIVPOL), Hans '73- s3 109" '56 s1 x2 77- s3 van (gone)& '12- 110

  6. #6
    Join Date
    Nov 2007
    Location
    Cedar Grove SE QLD
    Posts
    776
    Total Downloaded
    0
    What a nice vehicle and I se it has a rear PTO and the correct horn button dip switch witch are usually broken.

  7. #7
    Join Date
    Jun 2009
    Location
    australia
    Posts
    904
    Total Downloaded
    0
    Quote Originally Posted by BreakingBad View Post
    Hi All,

    Introducing my latest acquisition, a 1956 Series 1 ute.
    hi you still have the original towing plate under the pto good find well done

    An extra big thanks to Mick_Marsh for lending his trailer so I could get it home.

    Car looks pretty good. Some rust in firewall/bulkhead but otherwise appears ok.

    Looks like an original motor. The engine model number 212192 seems about right although I haven't chased up the engine and chassis numbers yet.

    Apart from the accumulation of dust and the paint flaking off the roof lining, the interior looks to be in great condition. The seats look almost new and it's even got the horn insert.

    My first question is about the canopy which is sitting on the ute tub back to front. I think its an after market job as it is made of steel and quite rusted. Anyone know if they were an original option?

    cheers

    Wayne
    hi wayne you still have the original towing plate under the pto all good jim
    Russell Rovers
    Series I Parts Specialists
    russellrovers AT gmail.com
    Phone 0428732001

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!