Results 1 to 5 of 5

Thread: UltraGauge: Puma fuel calibration factor?

  1. #1
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0

    Question UltraGauge: Puma fuel calibration factor?

    Hi brains trust,

    Anyone else running an UltraGauge in a Puma Defender? If yes, what is your fuel calibration factor?

    My 2.2 looks to be reading about 4x high on UltraGauge fuel consumption with a 1.0 factor (uncalibrated). Yes I know I need to run the calibration for it to read correctly but it did seem odd for it to be that far out.

    Real world unloaded I look to be getting 800km per tank basically all city cycle which, seems to be about right based on the manufacturer specs unless someone else reckons I drive with a little too much right foot

    Thanks in advance
    FWD

  2. #2
    Join Date
    Jun 2007
    Location
    Margaret River
    Posts
    800
    Total Downloaded
    0
    Last time I calibrated mine, I recall it was 0.371

  3. #3
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0
    For the record mine looks to be around 0.33 or there about...

  4. #4
    n plus one Guest
    Can't remember, but a few cal rounds gets it pretty much on the nose anyway.

  5. #5
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0
    Forgot to mention my best fuel consumption figures so far are 73km at 7.5l/km.

    Yes it was downhill most of the way (blue mountains from Bilpin to the eastern end of the M4), but angel gear wasn't used at all due to traffic.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!