3801 to steam again!

[drivesafe]

https://www.facebook.com/Loco3801/

[Scouse]

It might be a while off yet now that they've decided that it's going to be easier to repair the old boiler than modify the new one. What a fiasco that was...

[Fatso]

Used to fire then eventually drive 3801 and a lot of others when I was a young bloke , hard work sometimes especially from Picton to Bargo with freight or on the Newcastle Flyer flat out Hi-wheel .


But on reflection it was great days , better than a real Job !!!!

[Pickles2]

Used to fire then eventually drive 3801 and a lot of others when I was a young bloke , hard work sometimes especially from Picton to Bargo with freight or on the Newcastle Flyer flat out Hi-wheel .


But on reflection it was great days , better than a real Job !!!!

You must have some great memories.
Growing up in England, in the fifties, it was many boys' dream to be a "Train Driver" (Steam of course!), & I lived in Manchester just around the corner (literally) from the HUGE Beyer Peacock works, which manufactured over 8800 Steam locos, quite a few of which ended up on Aussie railways. And my Dad's relatives, the "Budenbergs", manufactured steam pressure guages, many of which I've seen in Aussie locos.
Pickles.

[Pedro_The_Swift]

Used to fire then eventually drive 3801 and a lot of others when I was a young bloke , hard work sometimes especially from Picton to Bargo with freight or on the Newcastle Flyer flat out Hi-wheel .

Please explain?

[Fatso]

Passenger trains where reffered too as hi-wheel , as most passenger locos like the 38 class and 36 class had driving wheels of around 6' 4" in height for speed and freight locos had much smaller wheels for better traction , that's why locos like 38 class were a bugger of a job pulling freight trains , from memory 38/36 class loco,s could only pull about 565 tons to Goulburn . Not sure where the term originated but there you go .

[Fatso]

You must have some great memories.
Growing up in England, in the fifties, it was many boys' dream to be a "Train Driver" (Steam of course!), & I lived in Manchester just around the corner (literally) from the HUGE Beyer Peacock works, which manufactured over 8800 Steam locos, quite a few of which ended up on Aussie railways. And my Dad's relatives, the "Budenbergs", manufactured steam pressure guages, many of which I've seen in Aussie locos.
Pickles.

Have some great memories both good and bad mostly good though , used to have great fun when I first started as shop boy in the Chullora workshops at 15 yrs of age , and at 17 was excepted as a Trainee Engineman ( oops, person ) at Enfield . There is something alive in Steam Engines, I thought so anyway , we had the 60 class Bayer Garret in NSW great loco as long as you knew how to fire them , unforgiving if you didn't .

[drivesafe]

Passenger trains where reffered too as hi-wheel

When I was at both Eveleigh and Delec, long after steam had finished, there were a few regular tabled high speed goods trains that were also referred to as High Wheelers

[Fatso]

[QUOTE=drivesafe;2454333]When I was at both Eveleigh and Delec, long after steam had finished, there were a few regular tabled high speed goods trains that were also referred to as High Wheelers[/QUOT per


Perishable goods trains had that label , mostly were pulled by pax loco,s for speed , thay actualy got priority over pax trains sometimes .

[Orkney 90]

As a current Eveleigh driver, we still use the term "high wheeler" for express services that make few stops.