Results 1 to 8 of 8

Thread: Those Kingfish Sure Can Pull Hard

  1. #1
    Join Date
    Jan 1970
    Location
    Melrose Park NSW
    Posts
    1,559
    Total Downloaded
    0

    Those Kingfish Sure Can Pull Hard

    Had a session this week chasing big Kings off Sydney. To get the big fellas you need live squid which proved a problem trying to catch. 4 hours to catch 4 squid then off to the secret spot.

    Drop the first and smallest of the squid and within 10 seconds my rod loads up big time. 80lb braid 130lb leader and the reel drag wound up tight and locked - if you give them any line they will run you over the reef and its all over Irene.

    Half way through the tussle the rod loads up then BANG, my two piece Gladiator 30kg jig stick turns into a 5 piece.

    I had to revert to my soft plastic rod and undo the drag to keep fishing this led to being busted off a few times. Managed to get another three fish on board all around the 1.1m mark. Kept two for distribution to family and friends.
    [IMG]

    [/IMG]

    I have written to Gladiator and posted on their Facebook page as the rod is only 6 months old and has done bugger all work.

    Still to hear from them. When I bought it I told the guy exactly what I wanted it for and was assured this is the stick for you. Should have bought a T Curve.
    Chenz
    I do not wish to be a member of any club that would have me as a member

    Former Owner of The Red Terror - 1992 Defender 200Tdi
    Edjitmobile - 2008 130 Defender

  2. #2
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    Nice, too bad about the rod, here's hoping they do the thing for you.

  3. #3
    Join Date
    Jan 2009
    Posts
    158
    Total Downloaded
    0
    maybe have a look at a yamaga jigging rod. nice parabolic curse you'll be doing well to break it

  4. #4
    Join Date
    Dec 2006
    Location
    Torres Straits
    Posts
    3,503
    Total Downloaded
    0
    Nice kingies...
    Definitely should a bought a t curve ... I love the 300 spin. The 200 is great for trout but lacks when in 40plus chasing reds. The 300 has the grunt for 10kg reds but is still sensitive enough for trout. The 400 is a liitle too stiff for mine.

    Them size kings the 200 or 300 would roll nicely. 300 would give you a bit more reserve if a donkey mosied along.

    S
    '95 130 dual cab fender (gone to a better universe)
    '10 130 dual cab fender (getting to know it's neurons)

  5. #5
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Onya Chenz.
    Great to see some action in The Shack.
    Cheers
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  6. #6
    Join Date
    Jan 1970
    Location
    Melrose Park NSW
    Posts
    1,559
    Total Downloaded
    0
    Gladiator came to the party. They said they don't usually replace broken rods as they break for a myriad of reasons. They gave me a brand new top shelf jig rod for cost $100. Usually $680.

    Now off to find a few bigger kings to give it a real workout
    Chenz
    I do not wish to be a member of any club that would have me as a member

    Former Owner of The Red Terror - 1992 Defender 200Tdi
    Edjitmobile - 2008 130 Defender

  7. #7
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    That's good of them to come to the party.

    $580 profit normally . No wonder my boss buys everything online from OS.

  8. #8
    Roverlord off road spares is offline AT REST
    Major part of the heart and soul of AULRO.com
    Vendor

    Subscriber
    Join Date
    Jul 2012
    Location
    Tecoma Vic
    Posts
    9,642
    Total Downloaded
    0
    Quote Originally Posted by Chops View Post
    That's good of them to come to the party.

    $580 profit normally . No wonder my boss buys everything online from OS.
    Chops, About to say that myself, and especially that most of the top brand rods are made in China where it costs nix for labour!
    Cheers, Mario


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!