Andy, it will be the actuator needing to be replaced. Have a search for the recent thread on same issue. There was a link to a good set of how-to instructions on the Disco3 forum.
Scott
Does anyone one how to resolve this issue?
When I lock my '06 D3 the drivers door don't lock. I can hear the doors lock, but if I check the drivers door, it opens and the alarm goes off.
I haven't figured out if it is happening all the time yet but I do know that a double press doesn't work either.
Andy, it will be the actuator needing to be replaced. Have a search for the recent thread on same issue. There was a link to a good set of how-to instructions on the Disco3 forum.
Scott
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
And a search tip .... Use the custom Google search at the bottom of every page. It only searches in AULRO but works much better. Include D3 with any other search words and it will keep the results in this sub-forum.
Cheers,
Scott
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
Thanks Scott. I'll look into it.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks