110 Wagon - Removing Plastic Panel

[mike_beecham]

Hi All
Trying to remove the rear seatbelt. How does one remove the plastic trim that surrounds rear sliding windows (and covers access to the seatbelts).

Thanks!!!!

Michael

[Toxic_Avenger]

Put some snips together for you.

Not sure how diffierent the 110 is to the 90. Instructions seem a little on the vague side for the top trim clips, but I added the pic with the locations for you to be sure, to be sure.

Defender 110 trim removal steps - Album on Imgur

[JoeFriend]

Pretty simple really, although my defender may be different to yours (part of the charm I hear!).

You first need to remove the plastic trim on the small rear windows either side of the door - the just pull off. Then remove 3 Philips head bolts on the bottom of the long plastic trim. Remove sear belt bolt, can't remember socket size (by levering off the plastic cover first).

That should do it. You will still have the seatbelt running through the cover, but you will figure out which way to full remove it if necessary from there (I haven't done it so no idea).