Technically everything is available through the canbus and anything could be written, once you understood the propriety codes and how to interpret it all. You might be able to get info from the likes of GAP but I doubt it.
 ChatterBox
					
					
						Supporter
					
					
						ChatterBox
					
					
						SupporterHi, I've been wondering if it would be possible on vehicles that don't have the info screen, to display this info on a tablet or phone via the obd2 port and a Bluetooth adapter, obviously an app would need to be written...
But is this info even available via the port?
Cheers James
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						SubscriberTechnically everything is available through the canbus and anything could be written, once you understood the propriety codes and how to interpret it all. You might be able to get info from the likes of GAP but I doubt it.
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
Link to my D4 Build Thread
D3 2005 V8 Petrol
Ex '77 RRC 2 door. Long gone but not forgotten.
 ChatterBox
					
					
						Supporter
					
					
						ChatterBox
					
					
						Supporter"Unfortunately"
Ours came with a nanocom which I was pleased about as am really quite familiar with them, but that probably means getting anything else is a good ways off,
oh well, will see if this thread sparks some interest...
I have the 4x4 info screen and I find it of absolutely no value so don't think you are missing out on much.
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						Subscriber Master
					
					
						Master
					
					
                                        
					
					
						Watching
 ChatterBox
					
					
						Supporter
					
					
						ChatterBox
					
					
						Supporter| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks