I have a 3rd fob for my MY10, and if doable would like to cancel it and reprogram it as a spare for the MY16.
Is this doable with the GAP Tool (obviously talking about cancelling the existing MY10 "program" and starting again for the MY16)
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
I had previously been under the impression (from my reading of forum posts) that you couldn't program keys on the "later" discovery 4's. The attached post from a US forum (Land Rover World) was the first info that I have come across that looked promising. I would contact GAP for a definitive answer, they usually respond super fast to requests for help.
Hope this helps a bit.
Peter
2014 D4 HSE, Traxide Dual Battery System, llams, Compomotive Rims, Prospeed Roof Rack, Rock Sliders and Compressor Guard.
There is also this thread that seems to suggest that you can and that the key will not longer be usable in the old car (bottom of post 4)
Discovery 4 key programming
2014 D4 HSE, Traxide Dual Battery System, llams, Compomotive Rims, Prospeed Roof Rack, Rock Sliders and Compressor Guard.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks