Results 1 to 4 of 4

Thread: Discovery 4 Brake Controller Issues

  1. #1
    Join Date
    Oct 2022
    Location
    Brisbane
    Posts
    1
    Total Downloaded
    0

    Discovery 4 Brake Controller Issues

    Has anyone had issues with the tow pro elite locking the brake system when the headlights or park lights are engaged. My research so far indicates that you need to put an adaptor on to the CAM BUS as it uses the service brake pin for diagnostics. Does anybody else know another work around.


    Cheers

    John

  2. #2
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    This sounds as though the 2nd trailer parker light wire which uses the electric brake pin in the trailer socket hasn't been cut. Long time ago but when the wire wasn't cut and auto lights turned on the lights in a tunnel caused trailer brakes to apply. The wire is usually cut just behind the left tailight cluster inside or outside the vehicle.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  3. #3
    Join Date
    Apr 2012
    Location
    Whyalla, SA
    Posts
    7,545
    Total Downloaded
    0
    As per Graemes post above, its sounds like your install hasnt been done correctly. A wire in the factory loom needs to be disconnected and a diode also added to protect the CJB from any spikes.

    Who did your install?

  4. #4
    Join Date
    Jan 2019
    Location
    Potato Point NSW
    Posts
    50
    Total Downloaded
    0
    Have a look here. parking lights come on whilst braking (aulro.com)

    Thread #8 has a PDF drawing of the plugs and shows where to connect the brake controller.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!