Black out the front and rear bumper

[Scottxx]

Hi folks, picked up my D300 SE 110 yesterday. Now wanting to paint the silver front and rear bumper to match with the black body color. I went to a local panel beater and received a quote for $1850 and there may will be an additional $600 on top for a technician to recalibrate the cameras. Feel its way too expensive. Just wondering if anyone has done this?

[jwb]

Removing the front bumper is time consuming- check out the YT video from Powefuluk.
That might be part of the cost.

[scarry]

Removing the front bumper is time consuming-.

Just wait until you also try to get the bash plates and undertrays off to give the vehicle a good clean after it has been on the beach,or in the mud.
Then put them all back on.

They must have designed it with the thought it would never go off road.

Another wonderfully well thought out LR design

[4bee]

Just wait until you also try to get the bash plates and undertrays off to give the vehicle a good clean after it has been on the beach,or in the mud.
Then put them all back on.

They must have designed it with the thought it would never go off road.

Another wonderfully well thought out LR design

I can just hear two blokes on the Assembly Line just doing a final check on the nuts & bolts.
"Last one Bernie. That'll show those L Plate posers who reckon they can carry out repairs on these bloody cars so see if they can get these buggers undone. Carn Bernie lunch time".

[one_iota]

....
Another wonderfully well thought out LR design

Like changing a headlight globe on the "old" Defender

[Eric SDV6SE]

All good until you try to get a jack and stand under each corner. Was fun juggling jack and stands when I rotated the tyres at the first 5000km. Need to find or make an adapter for my trolley jack....

[DiscoJeffster]

Hi folks, picked up my D300 SE 110 yesterday. Now wanting to paint the silver front and rear bumper to match with the black body color. I went to a local panel beater and received a quote for $1850 and there may will be an additional $600 on top for a technician to recalibrate the cameras. Feel its way too expensive. Just wondering if anyone has done this?

Find someone who will mask and cover the area and spray in situ if you want the simplest and cheapest job.

[scarry]

I can just hear two blokes on the Assembly Line just doing a final check on the nuts & bolts.
"Last one Bernie. That'll show those L Plate posers who reckon they can carry out repairs on these bloody cars so see if they can get these buggers undone. Carn Bernie lunch time".

Before that it’s the designers and engineers,how can we make this vehicle as difficult as possible for anyone to pull apart or work on?

[4bee]

Before that it’s the designers and engineers,how can we make this vehicle as difficult as possible for anyone to pull apart or work on?

"Don't forget the Stealers Bernie, they expect to make a huge Motza out of our consideration for the Workshop Hourly Rate after all, we are a team"


Cynical? Moi?

[scarry]

Find someone who will mask and cover the area and spray in situ if you want the simplest and cheapest job.

Down to the green shed,a few spray cans of paint,all good,what could possibly go wrong?