Results 1 to 8 of 8

Thread: Grille Identification

  1. #1
    Join Date
    Feb 2007
    Location
    Yass NSW
    Posts
    2,683

    Grille Identification

    The grille below came attached to the front of my 107 and was fitted as part of the Holden conversion. I had initially dismissed it as a fridge shelf with a Land Rover badge but I suspect it may be from a FC.





    Any opinions one way or the other ?

    Regards,
    Tote
    Go home, your igloo is on fire....
    MY2016 Aintree Green Defender 130 Cab Chassis
    2007 Discovery 3 - Gone
    Discovery 2 SE - Gone
    Discovery 1 TDI300- Gone
    1957 Series 1 107 ute - In pieces
    1955 Series 1 86 - parts
    Assorted Falcons and Jeeps.....

  2. #2
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    23,054
    Either forward control or possibly 80" lights-behind-grille, although all the pictures of these I can find have cutouts in the bottom corners.

    Guessing a 101, as the 109 and 110 seem to have an extension in the middle at the bottom.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Nov 2009
    Location
    Western Victoria
    Posts
    14,288
    Not a 101.

  4. #4
    Join Date
    Jul 2006
    Location
    East-South-East Girt-By-Sea
    Posts
    17,591
    Actually I'm not sure, the SIIa and SIIb have a drop down bit in the middle and don't have the two reinforced bolt holes at the top. The 80" have cut outs at both bottom corners. Could it be home made?


    You won't find me on: faceplant; Scipe; Infragam; LumpedIn; ShapCnat or Twitting. I'm just not that interesting.

  5. #5
    Join Date
    Nov 2013
    Location
    vacy
    Posts
    43
    I've no idea what model its from but i could put if to good use if its available?

  6. #6
    Join Date
    Jul 2012
    Location
    Brisbane
    Posts
    1,878

    Don't know either

    Hello from Brisbane.

    Don't know much about the grille, but the badge appears to be from an 80" model.

    Cheers

  7. #7
    Join Date
    Feb 2007
    Location
    Yass NSW
    Posts
    2,683
    Buggered if I know but it's up in the markets swap section. PM me if theres any interest.

    Regards,
    Tote
    Go home, your igloo is on fire....
    MY2016 Aintree Green Defender 130 Cab Chassis
    2007 Discovery 3 - Gone
    Discovery 2 SE - Gone
    Discovery 1 TDI300- Gone
    1957 Series 1 107 ute - In pieces
    1955 Series 1 86 - parts
    Assorted Falcons and Jeeps.....

  8. #8
    Join Date
    Dec 2006
    Location
    Narrogin WA
    Posts
    3,092
    It is a bit hard for me to tell from the photo, but the mesh looks to be welded rather than woven/crimped, which supports Diana's theory of it being home-made, especially with the 80" badge,

    Cheers Charlie

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!