Dog Point Screws

Dont want to knock up another set while you are at it do you ??
Name your price lol
Out of curiosity was it a 2 or 4 pinion diff?

Quote:

---

Quote:

---

Originally Posted by djam1

Dont want to knock up another set while you are at it do you ??
Name your price lol

---

They are easy enough to make however, will involve stripping the diff out with my way of doing it, so labour then becomes an issue on top of the machining.:( Maybe exchange housings?
I will keep the jigs for our good members that may need one done for some reason;)

Quote:

---

Out of curiosity was it a 2 or 4 pinion diff?

---

---

It was four pinion with MD shafts and AEU2522 CV's.

wait you have a mill but you cant mill back a normal set of socket head screws to suit?

dont forget to cut an oil groove into the peg plate.

[

Quote:

---

QUOTE=Blknight.aus;1250304]wait you have a mill but you cant mill back a normal set of socket head screws to suit?

---

I have a small lathe for that. All takes time. For a one off be fine. Cheaper to buy the screws, crazy isn't it:confused:

Quote:

---

dont forget to cut an oil groove into the peg plate.

---

[/QUOTE] Yea thanks, That would be a bad oversight. Just deciding if to bore the locating holes right through to the oil grove?

Quote:

---

Originally Posted by Rangier Rover

Can anyone here source these...
http://www.aulro.com/afvb/attachment...1&d=1273583002
Today I have finally managed to blow the front CWP wile reversing out of a nasty gully after I got hung up on a log:(

I only have four more spare 3.54 diffs here so want to peg them from now on.

I pegged a 4.7 in our 109 with a 5/8 bolt and two nuts but makes awful noises when the crown wheel works against it:eek:

I want to do the next one a little more scientifically.

Tony

---

I have quite a collection of Unbrako screws of many kinds. What diameter/pitch/length do you need and how many. I will have a look when you answer.

hello i work at a nut and bolt shop at sth tweed heads (tweed bolt supplies) , we have cup point socket grub screws that u could machine/ turn back your point . box lot are much cheaper for odd sizes but not sure of what your thread is so ?? until knowing what its , also have a cratfty tool maker close to us that does odd machining if required .cheers :)