Results 1 to 3 of 3

Thread: gas converter

  1. 26th July 2010, 07:12 PM #1
    cazzz12000 Guest

    Smile gas converter

    Hi guys just replacing my heater matrix in my 93 pre update disco and dont know if I ve done the water flow to the converter correctly? What I ve done is tapped into the heater hoses with to T pieces one feeding hoses and one return hose,will the converter get enough flow hooked up this way and does the heater feed go to the top or bottom on the converter? zacc
    Reply With Quote Reply With Quote
  2. 26th July 2010, 08:17 PM #2
    95disco1's Avatar
    95disco1
    95disco1 is offline Fossicker
    Join Date
    Jul 2010
    Location
    Blacktown
    Posts
    59
    Total Downloaded
    0

    Thumbs up Smile gas converter

    As a gas installer, As long as the heater water flows threw the bottom of the converter, it wont freeze over.
    Taping into both heater hoses is the best way to do it.
    If you have any problems feel free to pm me and ill get back to you asap with an answer.
    Paul
    Reply With Quote Reply With Quote
  3. 26th July 2010, 08:31 PM #3
    bee utey's Avatar
    bee utey
    bee utey is offline AT REST
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    The only time this can be a problem is if you have a 4-port heater valve in the lines to the heater. Then when the heater is off the flow through the tap could rob too much flow from the converter. Most D1's don't have this tap but I have seen a few with it.
    Reply With Quote Reply With Quote
« 2nd opinion on my diff whine | Rhythmic loss of power under load - new common rail Defender »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!