Thanks for all the replies!
I got a CTEK Multi XS4003 which did the trick and has lots of useful features. :)
Printable View
Thanks for all the replies!
I got a CTEK Multi XS4003 which did the trick and has lots of useful features. :)
Yep, bought exactly the same one to keep the RRC connected to while not in use. Cost me $107+ nails from Ashdowns.Quote:
Originally Posted by sam_d
Anyone considering a Ctek should check out the Ozcharge first before making the decision. I did a fair bit of research into Ctek/Ozcharge/Projecta and ended up going the Ozcharge - and the real world performance is proving to be as good as the theory - the 2/10/21 amp combo allows you to pump in heaps of charge into AGMs in a short period of time and much better VFM than equivalent Ctek
X2 !
I have the same 2/10/21 charger. Has a good feature set for calcium batteries, as well as AGM, and wet cells. I managed to recover a customers dead ride on mower battery that read 0.67v and wouldn't charge up on the automtive type charger at work. Ran the battery on a rejuvination cycle for 12hrs, then charged it with the equalisation option set, at 2A, and the battery fully recharged. Static voltage after 6hrs 12.75v :) Battery re-installed and all's good.
... could have been a fluke too ... ;)
Cost was $200. A good charger for not too many dollars.