This is a centrifuge filter I am yet to test, made in India. I am intending to test with a back up paper filter so reduce the risk.
Might be worth considering.
http://www.fryertofuel.com/wvo_centrifuge.html
Printable View
This is a centrifuge filter I am yet to test, made in India. I am intending to test with a back up paper filter so reduce the risk.
Might be worth considering.
http://www.fryertofuel.com/wvo_centrifuge.html
Was under mine yesterday, currently running a Zinga BE-10-18 ; described as follows: 3/4"-16UN, 3.4", 3.05", 18 PSID, 10 MICRON (NOMINAL). Has a bypass valve at 18psi. I was thinking of adding an adjustable pressure switch set at 15psi to measue the back pressure before the filter so there would be an indication of filter clogging prior actual bypass. there's no ADBV but where ithese filters are loctaed you really dont need one. Any oil in the block galleries after the filtershould drain back to the filter. The other question, which is also an option for fitting is,is there a non return valve in the line on the filter outlet? The option is to fit one to prevent the oil draining back.