Thread: Replacing the CD Player in the Disco 2 TD5.

Pics of the unit you have would assist.

Basically there will be slots in the front of the head unit which you insert rods of some description (either flat or round depending on model)

These unclip the locking mechanism and you just pull it out.

Look for 4 holes, 2 each side... these can be done using coat hanger wire, long nails etc. in each hole till it releases. Then gently pull the unit forward... (you need to do all 4 holes at once).

Any single Din head unit will then fit, Aerpro do loom adapters to suit (no cutting)

Called aerpro but they don't make adaptors for discos. Anyone know where I can get an adaptor for the 2000 disco td5 to fit a pioneer?