Front and rear rotors and pads.
New globes for the headlights.
Removed 6th and 7th seat.
New relay and wiring for the spot lights.
Printable View
Front and rear rotors and pads.
New globes for the headlights.
Removed 6th and 7th seat.
New relay and wiring for the spot lights.
Hi guys I picked up my new 90 a few weeks ago and was about to hook up my boat but could not get the trailer lights to work.It worked fine on the 130 . So I got the test light out an the earth is + ? It was a factory fitted tow bar is this right.
Cheers
Pete
Got Charlie out of the garage after a being away for a week and fitted his christmas present, a nice genuine leather steering wheel :)
Steve
On Saturday morning the green Hiline got an oil and filter change, rear suspension trailing arm bushes and the steering drop arm tightened. It drives much more nicely now.
Gave the old girl a wash and ArmorAll'd the dash.
A few weeks ago I removed this carburetor
http://i659.photobucket.com/albums/u...ps41821b2e.jpg
and disassembled it, replacing what needed to be done, put it all back together and lo n behold it leaked fuel at the union, remembering a long time ago ( nearly 40 years ago) we were out from Pilliga NSW in a mates Series 1 fitted with a S2A 4 cyl engine, when he stripped the thread for the union nut on the carby body:(:(:( long walk to anywhere no mobile phones back then, so being mindfull not to over tighten that union bolt, well it leaked :mad:
fuel leak - YouTube
I looked at it and carefully applied a little more tension to the union bolt, I think that I now have it fixed, well I hope I do LOL cheers Dennis:angel:
Well the alternator packed it in yesterday, so in the arvo I set about installing the 120 amp alt from my spare au falcon, have to wait until Thursday or Friday to go get some billet stock and lathe up a custom pulley, until then a donor alt out of my neighbors XF is running the show quite happily
Was down on power(Td5) so I investigated. First thought was delaminating hoses, so I removed them all and they looked ok.
I then plugged in Nanocom, who told me turbo over boost. This was about three this arvo and being Christmas eve I could not find a LR spare parts shop open.
Unpacked the Santa sack early and attempted to identify some 2A gearbox parts I picked up the other weekend. A real lucky dip situation.
Me and gearbox parts? Well, lets just say I'm on 'red tabs'. :) Its been like schoolwork, checking out diagrams in the LR Parts Manual.
Carzee's place
Fabricate new alloy heater duct dash panel.Hard part tomorrow fitting new skin
then start on the rewire:(