Yes and yes. It ended up piebald after I fitted it with the doors and cab off a Series 3 and the tailgate from Aussie Disposals. (Khaki, yellow, white and grey). Also has the high back seats from the Series 3.Quote:
Originally Posted by mick88
John
Printable View
Yes and yes. It ended up piebald after I fitted it with the doors and cab off a Series 3 and the tailgate from Aussie Disposals. (Khaki, yellow, white and grey). Also has the high back seats from the Series 3.Quote:
Originally Posted by mick88
John
Well yesterday I fitted the radiator hose sensor for my Engine Saver low coolant alarm, and finally bled the damn thing properly :D seems to be right now.
Today I finished the instal of the low coolant alarm, with a few odd hiccups.
I couldn't see the grommet on the firewall as:
a) I was looking for something totally different, and
b) my dual battery isolator was right on top of it!
So I removed that, then noticed that the wiring wasn't labelled so I traced the correct wires back, and then labelled them :D
After dicking around dropping various sockets in hard to reach places and my lack of a magnetic pick up, I fed the wire through the grommet, and tidied up the wire which I routed underneath the intake pipe, across underneath the second battery tray, and across the face of the firewall, and underneath the brake booster. All wiring covered with either split conduit tube or wiring shield.
Then the light was hooked up and the install finished up.
I also swapped over the accelerator pedal assembly, courtesy of my loaned pedal from JustinC, and with help from the man himself and Tombie in the removal and refit, thanks guys! :)
So I still have to remove my UHF and let TJM send it back to GME to be fixed under warranty, as well as move one antenna to the back door, and remove my broken one and get a new one!
Picked up the scrub guards for the lights on my 91RR from sandblasters today.Removed front grille for cleanup and new coat of paint.Unsure whether to powdercoat or paint or polish??
Any suggestions ??
???? you removed the wheels to fit the radio??Quote:
Originally Posted by JDNSW
Doesn't everyone?Quote:
Originally Posted by 85 county
Lots and lots of wiring of the winch switch and dual battery controller...
working on this monstrosity in the deefer
http://www.aulro.com/afvb/attachment...2709201505.jpg
http://www.aulro.com/afvb/attachment...2709201510.jpg
http://www.aulro.com/afvb/attachment...2709201507.jpg
More info in my build thread here
Stunned the expo with my killer flex :cool::p:angel:
https://www.aulro.com/afvb/images/im...015/09/197.jpg
Working on that...
Steve223, MR LR, myself, and Slunnie :cool: :cool: :cool:
https://www.aulro.com/afvb/images/im...15/10/1005.jpg
Was a good day, good to see some familiar faces and meet a few unfamiliar ones :)
Well on sunday I welded up some A frames, got horribly ill a couple hours later from breathing galv fumes. Thought I was gonna die. Any way I didnt. Today made the brackets up to mount the chassis onto A frames, now I have a rotisserie for the chassis. Looks good I think. :D:D Will try to add pics, not had much luck with this in the past......
What is wrong with this...says u need to login to attatch photos. I am bloody logged in. Please fix this moderators..:mad::mad::mad::mad::mad::mad::mad::ma d::mad::)
Cheers Rod
Sent from my GT-P5110 using AULRO mobile app[/SIZE]
Do your lungs a favour and get a disposable activated charcoal P2 mask. Wear it so you don't die next time;)Quote:
Originally Posted by 67hardtop
Having gotten home from the expo, I decided the Discovery had been complete for far too long :D
So I pulled it apart :)
https://www.aulro.com/afvb/images/im...2015/09/50.jpg
Removed the front end to re-spray the DIY mesh grill I made. Also removed the ECU to check for any oil in the red plug, not a trace :cool:
Then I began pulling the inside apart in order to start fitting this good gear I bought from Ken (Outback_1) :cool::cool::cool:
https://www.aulro.com/afvb/images/im...015/11/838.jpg
Tomorrow I need to pull my UHF out and get it sent away under warranty. And probably go and buy myself a new GME antenna.